WARNING: Unroll before use. Never plug in the LED lights
when rolled up, as this can result in product damage or a re.
PACKAGE CONTENTS
• LED tape light • Double-sided tape
• Remote control • RF controller box
• Screws (2) • Quick Setup Guide
FEATURES
• Premium LEDs produce 15 selectable colors and white light
• 16 ft. LED tape light can be cut to length
• Remote control works anywhere in the room—no need to
point at the light
• Multi-step dimmer adjusts to the brightness level you want
• Four modes of ashing: Flash, Strobe, Fade, and Smooth
• Self-adhesive backing adheres to TVs, cabinets, or other
surfaces for quick, custom lighting
• Powered by AC wall power for constant use
Before using your new product, please read these instructions to prevent any damage.
USING YOUR TAPE LIGHT
Shortening your tape light
• Use a pair of scissors to cut on a cut line. Cut lines are about
3.9 in. (9.9 cm) apart.
Warning: Do not cut the silver solder markings. Only cut in the
center of the copper-colored pads, as shown.
Attaching your lights
1 Peel the adhesive backing o the lights, then adhere the
lights where you want them.
2 Optional: Attach the double-sided tape to the back of the
RF controller box, then adhere it where you want it.
OR
Attach the RF controller box to a surface using the included
screws. There are two holes on the controller box to allow
for a rm attachment.
Notes:
• Make sure that the tape light is unrolled, otherwise it can
damage the tape light or cause a re.
• Every surface is dierent, and additional adhesive may be used
if the LED tape detaches from the surface. Small pieces of clear
tape can be used.
QUICK SETUP GUIDE
16 ft. Multi-Color
LED Tape Light
NS-LED16RGB18 / NS-LED16RGB18-C
P
O
W
E
R
R
F
R
e
m
o
te
C
o
n
tr
o
l
l
er
R
G
B-
2
4
Bu
tto
n
s
In
p
u
t
: D
C
12
V 2
A
O
u
tp
u
t
:
D
C
1
2V 2
A
AC adapter
Waterproof connector Waterproof connector
RF controller box
Remote control
Cut line Cut line
Tape light
Remote control
Cut line Cut line
Adjusts brightness and speed
Turns on and o
Selects a color
Changes the various transition modes
Cycles through red, green, and blue
Connecting to power
1 Push both ends of the waterproof connectors together,
making sure that the arrows line up.
2 Turn the cap until it is secure.
3 Plug the AC adapter into a power outlet.
4 Remove the plastic battery-saver tab from the remote
control.
AC adapter
Cap
Arrows
Loading ...
