Loading ...
Loading ...
Loading ...
14
/ Use
BURNERS AND GRATES
The fl ame spreaders and burner caps must be
correctly positioned in order for the hob to operate
properly.
Incorrect positioning of the fl ame spreaders and
caps can lead to burner damage.
The grids must be positioned in their seats inside
the hob.
USING THE BURNERS
Next to each knob is an indication of which burner
it operates.
Turn the knob corresponding to the selected
burner to the left to the MAXIMUM position (large
fl ame).
Press the knob to start the gas fl ow and ignite the
burner.
When the burner lights, keep the knob held down
for around ten seconds, then release.
If the burner goes out after releasing the knob,
repeat the entire operation.
To shut off the burner, turn the knob to the right to
the zero position.
USING DUAL BURNERS (where applicable)
Dual burners off er greater fl exibility, as it is
possible to light both rings or just the inner ring.
Turn the corresponding knob to the left to the
MAXIMUM position (1).
Press the knob to start the gas fl ow and ignite the
burner.
When the burner lights, keep the knob held down
for around ten seconds, then release.
If the burner goes out after releasing the knob,
repeat the entire operation.
In position 2 the outer ring is at the minimum
setting and the ring crown is at the maximum.
In position 3 the inner ring is at the maximum
setting and the outer ring is off .
In position 4 the inner ring is at the minimum
setting and the outer ring is off .
Tips for optimum burner use:
• Use appropriate pans for each burner (see
table).
• When the pan boils, move the knob to the
MINIMUM position.
• Always use pans with lids.
USE
BURNER PAN DIAMETER
(RECOMMENDED) cm
Auxiliary 12 - 14
Semi-rapid 14 - 26
Rapid 18 - 26
Crown 22 - 26
Dual 22 -26
X
X
Loading ...
Loading ...