Loading ...
Loading ...
Loading ...
37
System: Maintenance
Enable auto reboot: It’s recommended to leave this enabled as it main-
tains the operational integrity of the NVR.
Auto reboot at: Choose an appropriate day and time to reboot the NVR.
Upgrade From USB: Click this to upgrade the firmware from a local
source such as a USB flash drive. Select the firmware file, click “Up-
grade” then “OK” to confirm. When the firmware upgrade has complet-
ed, the NVR will reboot automatically.
Check for latest version: Click this to check if an updated firmware is
available using your Internet connection. A message will appear on-
screen informing you if an update is available. Click the “Upgrade” but-
ton to proceed then follow the on-screen instructions.
Upgrade IPC From USB: Click this to upgrade the camera’s firmware
from a local source such as a USB flash drive (see above right screen-
shot). The number of channels visible will depend on how many IP
camera inputs your NVR has. To upgrade the firmware, click “Browse”,
select the firmware file then click “OK”. Repeat these steps for each
camera connected. When finished click “Upgrade”. Each camera will
restart when the upgrade has completed.
Default Settings: Click this to restore factory default settings.
Configuration: Click this to export or import a configuration file contain-
ing all the settings that you have customised.
• Click the “Default” button to revert back to default settings.
• Don’t forget to click “Apply” to save settings.
• Right-click the mouse to exit the Menu.
Loading ...
Loading ...
Loading ...