Loading ...
Loading ...
Loading ...
NOTE:
• The DTE value after refill is estimated
based on recent fuel economy and
amount of fuel added.
• If a small amount of fuel is added, or
the ignition is on during refueling, the
display may not be updated.
• Conditions that affect the fuel
economy will also affect the estimated
DTE value (city/highway driving, idle
time, remote start time, terrain, sea-
sonal weather, added vehicle weight,
added deflectors, roof racks, etc.).
TRIP COMPUTER (if so equipped)
When the ignition switch is placed in the ON
position, modes of the trip computer can
be selected by pushing the TRIP RESET
switch
O
A
.
Each time the TRIP RESET switch is pushed,
the display changes as follows:
Trip A → Trip B → Odometer
The
switch for the trip computer is
located on the lower left side of the instru-
ment panel.
Each time the
switch is pushed, the
display will change as follows:
Average fuel economy → Average speed →
Trip time → Trip Distance
Average fuel economy (mpg or
km/l)
The average fuel economy mode shows
the average fuel economy since the last
reset. Resetting is done by pressing the
change/reset switch for more than ap-
proximately 1 second. The display is up-
dated every 30 seconds. At about the first
1/3 mi (500 m) after a reset, the display
shows (----).
Average speed (mph or km/h)
The average speed mode shows the aver-
age vehicle speed since last reset. Reset-
ting is done by pressing the change/reset
switch for more than approximately 1 sec-
ond. The display is updated every 30 sec-
onds. The first 30 seconds after a reset, the
display shows (----).
Trip time
The trip time mode shows the time since
the last reset. The displayed time can be
reset by pressing the change/trip switch
for more than approximately 1 second.
LIC3594
Instruments and controls 2-9
Loading ...
Loading ...
Loading ...