Loading ...
Loading ...
Loading ...
''
,
9 ,
2
; &" @&$ EB
D=&* ANA?E
*
L
?
D*,T0>E
;
Q
@
*
D E
FF ! !
&"" G&""(
# ;!$
C
!
CONNECTION
At the bottom of the oven surround you will
find a rating plate specifying the gas used for
calibration. If you are using exactly the same
type of gas, carefully follow the connection
instructions. If not, the oven must be adapted
to the type of gas available before following
the connection instructions.
Connection instructions (fig. 3)
The appliance must be connected to the gas
supply by means of a rigid metal pipe or a
metal hose in compliance with the
regulations in force in the country.
The connection between the gas ramp
coupling and the pipe must be made as
follows:
1. tapered fitting (ISOR7) with seal on
thread plus addition of suitable sealing
agent;
2. by fitting an approved sealing gasket
(aluminium, copper, rubber) in-
between.
WARNING: application of a rubber
hose to the hose fitting is not
allowed because it cannot be
inspected.
15
Loading ...
Loading ...
Loading ...