Loading ...
Loading ...
Loading ...
12 Put the dust container back into the appliance (Fig. 23).
13 Close the cover (‘click’) (Fig. 24).
1 Switch off the appliance and remove the mains plug from the wall socket.
2 Press the cord rewind button to rewind the cord.
3 You can store the appliance in two ways:
- Insert the ridge on the nozzle into the parking slot to park the tube and then put the appliance
away (Fig. 10).
- Store the appliance and its accessories in the storage box supplied.
4 To store the appliance, look at the storage gure at the beginning of this user manual. This
gure shows you how to store the appliance and its accessories in the box or plastic storage
container.
Always unplug the appliance before you replace a lter.
Your vacuum cleaner is equipped with either a micro lter or a HEPA Filter.
Replace the micro lter every 6 months.
1 To remove the lter grille, turn it anticlockwise (1) and pull it out (2) (Fig. 26).
2 Remove the lter holder from the grille.
3 Remove the old lter from the lter grille.
4 Put the new lter on the grille and lock it into place with the lter support (Fig. 27).
5 Put the lter grille back into the appliance (1) and turn it clockwise (2) (Fig. 28).
Replace the HEPA lter every 6 months.
1 To remove the lter grille, turn it anticlockwise (1) and pull it out (2) (Fig. 26).
2 Remove the HEPA lter (Fig. 29).
3 Insert a new HEPA lter.
4 Put the lter grille back into the appliance (1) and turn it clockwise (2) (Fig. 28).
If you have any difculties obtaining lters or other accessories for this appliance, please contact the
Philips Consumer Care Centre in your country or consult the worldwide guarantee leaet.
- HEPA lters are available under type number FC8029.
- Micro lters are available under service number 4322 000 38900.
- Filter cylinders are available under type number FC8028.
9
Loading ...
Loading ...
Loading ...