Loading ...
Loading ...
Loading ...
Problem solving guide
168
Problem Possible cause and remedy
The sensor controls or
the proximity sensor do
not respond.
You have selected the Display| QuickTouch| Off setting.
When this is activated, the sensor controls and
proximity sensor do not respond when the steam
oven is switched off.
As soon as the steam oven is switched on, the
sensor controls and the proximity sensor will
respond. If you want the sensor controls and the
proximity sensor to respond even when the steam
oven is switched off, select the Display|
QuickTouch| On setting.
The settings for the proximity sensor are switched off.
Change the settings for the proximity sensor by
selecting Settings| Proximity sensor.
The proximity sensor is defective.
Call Miele.
The steam oven is not connected to the power
supply.
Check that the steam oven plug is correctly
inserted into the socket.
Check if the circuit breaker has tripped. Contact a
qualified electrician or Miele.
If the display does not respond, there is a fault with
the controls.
Touch and hold the On/Off sensor until the
display switches off and the steam oven restarts.
A humming sound can
be heard during
operation and after
switching off the steam
oven.
This noise does not indicate incorrect operation or an
appliance fault. The noise is made by water being
pumped through the system.
After moving house, the
appliance no longer
switches from the
heating-up phase to the
cooking phase.
Altitude affects the boiling point of water. If you move
house, the appliance will need to be reset for the new
altitude if this differs from the old one by more than
300m.
To adjust the boiling temperature, you need to
descale the appliance (see “Cleaning and care –
Maintenance”).
Loading ...
Loading ...
Loading ...