Loading ...
Loading ...
Loading ...
18
Audio Zone Setup
The MM100s-BE is equipped with four
sets of low-voltage, line-level RCA outputs
to send audio signals to your aftermarket
amplifiers/equipment. Each output pair
delivers full-range, low-distortion audio,
arranged into four zones. Depending on
your equipment and vessel, this will allow
you to group speakers of an area together
for flexibility and control of audio levels
at separate zones. For example, you may
prefer to reduce the listening level in an
interior cabin, while keeping a louder
audio level on the main deck.
Access the Audio Zone Setup menu to
congure the functionality of each zone.
1. Press and hold to access
the System Settings: Main Menu.
2. Press to select Audio
Zone Setup.
3. Use to make selections.
Refer to the table below and the
following page for each zone’s available
settings and functionality.
Zone Menu Setting 1 Setting 2
Z1: Zone 1
Z2: Zone 2
Z3: Zone 3
Z4: Zone 4
Level Control Mode
Relative
Absolute
Fixed
4V RMS Max (default)
2V RMS Max
1V RMS Max
O
Rename Zone
Bow, Bridge, Cabin, Cockpit, Galley,
Helm, Stateroom 1, Stateroom 2,
Tower, Transom, Sub 1, Sub 2
Custom Name Alphanumeric Input
Factory Default
Volume Limt Max Vol Limit
Z2: Zone 2
Z3: Zone 3
Z4: Zone 4
Tone Control Mode
Same as Main Zone
Independent Tone Control
Loading ...
Loading ...
Loading ...