Loading ...
Loading ...
Loading ...
Before using for the first time
27
Setting up Miele@home
Connecting via the App
The Miele@mobile App can be used to
connect to your network.
Install the Miele@mobile App on your
mobile device.
To log in you will need:
1. Your Wi-Fi network password
2. The password of your cooktop
The password for your cooktop
consists of the last nine digits of the
serial number. This can be found on the
appliance's data plate.
Switch the cooktop on.
Start the Miele@mobile App.
Touch the0 and 5 sensors at the
same time for 6seconds.
The seconds can be seen counting
down in the timer display. When this
time has elapsed, the code : is
displayed in the timer display for 10
seconds.
You now have 10 minutes to configure
the Wi-Fi.
Follow the instructions in the App.
Connecting via WPS
You must have a WPS (Wi-Fi
protected setup) compatible router.
Switch the cooktop on.
Touch the0 and 6 sensors at the
same time for 6seconds.
The seconds can be seen counting
down in the timer display. When this
time has elapsed, a progress light will
appear during the connection attempt
(for max. 120 seconds).
The WPS login is only active during
these 120 seconds.
Activate the WPS function on your
router.
If the connection was successful, the
code : appears in the timer display.
If the connection could not be
established, the timer display will show
the code :. You have probably not
activated WPS on your router quickly
enough. Repeat the steps above.
Useful tip: If your Wi-Fi router does not
support WPS, please connect via the
Miele@mobile App.
Loading ...
Loading ...
Loading ...