Loading ...
Loading ...
Loading ...
10 - EN
warms up. Adding the ingredients
too quickly or in large amounts
could cause the whisk to stop or
detach from its housing.
Manual function
Remove the lid (4) and pour the milk into the
jug (2), referring to the level indications printed
inside the jug.
• Refit the lid (4).
You can select a hot cycle or a cold cycle.
Hot Manual:
• Start the Manual Program (M), with heating
function, by pressing the START/STOP but-
ton, the LED (8) lights up steadily; the speed
of the whisk and the temperature increase
proportionally to the duration of the cycle.
The user can interrupt the cycle by pressing
the START/STOP button whenever obtaining
the desired result.
Cold Manual:
• Keeping the START/STOP button pressed
for about 3 seconds, the whisk starts to froth
the milk without heating it and the LED (8)
flashes for the entire duration of the cycle.
The user can interrupt the cycle by pressing
the START/STOP button whenever obtaining
the desired result.
• In both cases, after a certain time,
the manual function will automati-
cally stop to preserve the safety and
functionality of the product.
• An acoustic signal and the turning
off of the LED (8) indicate the end
of the cycle.
• Then proceed as described for milk.
Cleaning and maintenance
You can remove the measuring cap
(5) to add any powder ingredients
(example: instant coffee, soluble
cappuccino, soluble tea, etc.) dur-
ing the work cycle.
CLEANING AND
MAINTENANCE (Fig. 1)
Before cleaning, ALWAYS discon-
nect the plug from the socket and
allow the appliance to cool down.
Never immerse the motor base (1)
in water or other liquids.
The instruction manual contains appropriate
instructions and provisions for cleaning, main
-
tenance and operations recommended by the
manufacturer to the customer. Any other inter-
vention must be performed by an authorized
service representative.
• Remove the whisk (3).
• Remove the jug (2) from the motor base.
• The whisk (3), the lid (4), the measuring cap
(5) and the jug (2) can be washed in the
dishwasher.
• The motor base (1) can be cleaned by first
using a damp cloth and then a dry one. Do
not use detergents or abrasive materials.
Loading ...
Loading ...
Loading ...