Loading ...
Loading ...
Loading ...
English
32
USING THE PROJECTOR
Projector settings menu
Lamp Settings
Lamp Hour: Display the projection time.
Lamp Reset: Resets the lamp hour counter after replacing the lamp.
Lamp Reminder: Choose this function to show or to hide the warning message when the changing
lamp message is displayed. The message will appear 200 hours before suggested replacement of
lamp.
Filter Settings
Filter Usage Hour: Display the lter time.
Filter Reminder: Choose this function to show or hide the warning message when the changing lter
message is displayed. The available options include 300hr, 500hr, 800hr, and 1000hr.
Filter Reset: Reset the dust lter counter after replacing or cleaning the dust lter.
Power Settings
Direct Power On: Choose “On” to activate Direct Power mode. The projector will automatically power
on when AC power is supplied, without pressing the “Power” key on the projector keypad or on the
remote control.
Auto Power Off: Choose “On” to activate Auto Power Off mode. When no signal is detected or the
projector is left idle for 20 minutes, the projector will automatically power off.
Sleep Timer(min.): Sets the countdown timer interval. The countdown timer will start, with or without
a signal being sent to the projector. The projector will automatically power off when the countdown has
nished (in minutes).
Power Mode(Standby): Set the power mode setting.
Eco.: Choose “Eco.” to save power dissipation further < 0.5W.
Active: Choose “Active” to return to normal standby (LAN on, Wi-Fi off).
Full Power Active: Choose “Full Power Active” to return to normal standby (LAN on, Wi-Fi on).
Others
Projector ID: ID denition can be set up by menu (range 0-99), and allow user control an individual projector
by using RS232 command.
Test Pattern: Select the test pattern from Grid (Green), Grid (Magenta), Grid (White), White or disable
this function (None).
Projection Mode: Select the preferred projection between Front, Rear, Front-Ceiling, and
Rear-Ceiling.
HDMI EDID: Select the HDMI EDID type from 2.0 or 1.4.
Note: If you experience abnormal color issue, please adjust the EDID setting.
HDMI/VGA/USB Disk: Dene how the system will react when one of the input sources (HDMI/VGA/
USB ash drive) is connected to the projector.
Notication: Choose “Notication” to display the input switching conrmation message when an
input source is detected.
Source Auto-change: Choose “Source Auto-change” to automatically switch to the currently
detected input source.
None: Choose “None” to manually switch the input source.
High Altitude: When “On” is selected, the fans will spin faster. This feature is useful in high altitude
areas where the air is thin.
Loading ...
Loading ...
Loading ...