Loading ...
Loading ...
Loading ...
en Basic operation
12
Setting the appliance to air
extraction mode
Your appliance is set to air extraction
mode by default. To use it in air ex-
traction mode, you do not need to
set the operating mode.
Requirement:The appliance is
switched off.
▶
Press and hold for four seconds.
a Two audible signals sound.
a The LEDs for fan speeds 1 and 2
and the LED for the saturation in-
dicator light up in the LED display.
a The appliance is set to air extrac-
tion mode.
Basic operation
Basic operation
You can find out everything you need
to know about operating your appli-
ance here.
Switching on the appliance
▶
Press to switch on the appli-
ance.
a The appliance starts at fan set-
ting2.
a The LED for fan setting2 lights up
in the LED display.
Selecting a fan setting
▶
Press or .
a The LED for the set fan setting
lights up in the LED display.
Switching off the appliance
▶
Press and hold until the appli-
ance switches off.
Switching on intensive mode
If particularly strong odours or va-
pours develop, you can use intensive
mode.
▶
Press until you hear the appli-
ance switch into intensive mode.
a The LED for intensive mode
flashes in the LED display.
a After approx. 4 minutes, the appli-
ance automatically switches to fan
setting 2.
Switching off intensive mode
▶
To select a fan setting of your
choice, press .
Switching on intermittent
ventilation
With intermittent ventilation, the appli-
ance switches the ventilation on and
off at regular intervals.
1. Switch off the appliance and the
lighting.
2. Press .
3. Select a fan setting within
5seconds.
Fan settings 1–3 must be activ-
ated.
4. Press .
a The appliance switches on the
ventilation system for approx. 10
minutes every hour.
a The LED for intermittent ventilation
and the set fan setting flash in the
LED display for intermittent ventila-
tion.
Switching off intermittent
ventilation
▶
Press , , or .
Loading ...
Loading ...
Loading ...