Loading ...
Loading ...
Loading ...
13EN
Program radio stations
manually
You can program a maximum of 20 preset
radiostations(FM).
1 Tune to a radio station.
2 Press PROG to activate program mode.
» [PRG] (program)isdisplayed.
3 Press PRESET/ALBUM / to allocate
a number to this radio station, then press
PROG
toconrm.
4 Repeat the above steps to program other
stations.
Tip
• To overwrite a programmed station, store another
station in its place.
Select a preset radio station
• In tuner mode, press PRESET/ALBUM /
to select a preset number.
• You can also press the numeric keypad to
select a preset number directly.
Tip
• Position the antenna as far as possible from TV, VCR, or
other radiation source.
• For optimal reception, fully extend and adjust the
position of the antenna.
Select stereo/mono broadcast
For stations with weak signals: to improve the
reception, change to monaural sound.
• In tuner source, press OK to select a
setting:
• [STEREO]: stereo broadcast.
• [MONO]: monaural broadcast.
Show RDS information
RDS(RadioDataSystem)isaservice
that allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1 Tune to an RDS station.
2 Press RDS/DISPLAY repeatedly to scroll
through the following information (if
available):
» Station name
» Program type such as [NEWS](news),
[SPORT](sport),[POP M] (pop
music)...
» RDS RT
» Frequency
Synchronize clock with RDS
You can synchronize time shown on the unit
with that on the RDS station.
1 Tune to a RDS radio station that transmits
time signals.
2 Press RDS/DISPLAY for over 2 seconds.
» [CT SYNC] is displayed and the unit
reads RDS time automatically.
» If no time signal is received, [NO CT]
is displayed.
Note
• The accuracy of the transmitted time depends on the
RDS station that transmits the time signal.
Loading ...
Loading ...
Loading ...