Loading ...
Loading ...
Loading ...
22
5 Maintenance
T Fit the air intake pipe.
T Reassemble the milk system, noting the
numbering on the parts.
T Insert the assembled individual parts into
the dual spout and press them together.
They will click into place audibly.
T Fit the dual spout on the machine. It will
click into place audibly.
Inserting and activating the filter
Your ENA no longer has to be descaled if you are
using the CLEARYL Blue filter cartridge. If you did
not activate the filter cartridge the first time you
used the machine, you can do this now as follows.
E Perform the ‘inserting the filter’ operation
without any interruptions. This will ensure
that your ENA always produces its best.
1
2
Precondition:READY is displayed.
T Press and hold the Rotary Switch until
RINSE appears.
T Turn the Rotary Switch until
FILTER- is
displayed.
T Press the Rotary Switch to enter the
program item.
NO-
T Turn the Rotary Switch until YESp is
displayed.
T Press the Rotary Switch to confirm the
setting.
OK
INSERT FILTER
T Remove and empty the water tank.
T Open the filter holder.
T Insert the filter cartridge into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
T Place a receptacle (at least 17 oz or 500ml)
under the hot-water spout.
Loading ...
Loading ...
Loading ...