es
fr
en
pt
Instructions for use for ENA Micro 90
K
For your safety: read and understand manual before use.
E
2
Table of contents
Your ENA Micro 90
IMPORTANT SAFEGUARDS 4
Control elements 8
1 Preparing and using for the first time 10
3-color plain text display ...................................................................................................................................... 10
Setting up the machine ........................................................................................................................................ 10
Filling the bean container .................................................................................................................................... 10
First-time use .......................................................................................................................................................... 10
First-time use with filter cartridge activation .................................................................................................... 11
First-time use without filter cartridge activation .............................................................................................. 11
Determining the water hardness .........................................................................................................................12
Connecting milk ......................................................................................................................................................13
2 Preparation 13
Espresso, coffee ...................................................................................................................................................... 14
Latte macchiato, cappuccino ............................................................................................................................... 14
Milk foam ................................................................................................................................................................ 14
Ground coffee ......................................................................................................................................................... 14
Permanently setting the amount of water for the cup size ............................................................................15
Adjusting the grinder .............................................................................................................................................15
Hot water................................................................................................................................................................. 16
3 Daily operation 16
Filling the water tank ............................................................................................................................................ 16
Switching on the machine ................................................................................................................................... 16
Daily maintenance ................................................................................................................................................. 16
Regular maintenance ............................................................................................................................................ 16
Switching off the machine ....................................................................................................................................17
4 Permanent settings in programming mode 17
Products ...................................................................................................................................................................17
Setting the water hardness .................................................................................................................................. 18
Automatic switch-off ............................................................................................................................................. 18
Unit for amount of water ..................................................................................................................................... 18
Language ................................................................................................................................................................. 19
5 Maintenance 19
Rinsing the machine ............................................................................................................................................ 20
Rinsing the milk system ...................................................................................................................................... 20
Cleaning the milk system .................................................................................................................................... 20
Dismantling and rinsing the dual spout ............................................................................................................ 21
Inserting and activating the filter .......................................................................................................................22
Changing the filter.................................................................................................................................................23
Cleaning the machine ...........................................................................................................................................23
Descaling the machine ........................................................................................................................................24
Descaling the water tank ......................................................................................................................................26
Cleaning the bean container ...............................................................................................................................26
3
pt
es
en
it
fr
ru
en
de
Table of contents
6 Display messages 27
7 Troubleshooting 28
8 Transport and environmentally friendly disposal 29
Transport/ Emptying the system .......................................................................................................................29
Disposal ...................................................................................................................................................................29
9 Technical data 29
10 Index 30
11 JURA contact details/ Legal information 32
Symbol description
Warnings
This is the safety alert symbol. lt is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury or
death.
DANGER indicates a hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death
or serious injury.
J CAUTION
CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if
not avoided, could result in minor or moderate injury.
NOTICE NOTICE is used to address practices not related to personal injury.
Symbols used
T
Prompt to take action. This symbol means that you are being prompted to perform
some action.
E
Information and tips to make it even easier to use your ENA..
READY
Display message
J
J DANGER
J WARNING
4
IMPORTANT SAFEGUARDS
IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS.
Pass them on to any subsequent user.
When using electrical appliances, basic safety precautions shall always
be followed, to reduce the risk of fire, electric shock, and/or injury to
persons, including the following:
Z Read all instructions.
Z Do not touch hot surfaces. Use handles or knobs.
Z To protect against fire, electric shock and injury to persons, do not
immerse power cord, plugs, or body of machine in water or other
liquid.
Z Close supervision is necessary when any appliance is used by or
near children.
Z Unplug from outlet when not in use and before cleaning. Allow to
cool before putting on or taking off parts, and before cleaning the
appliance.
Z Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or has been damaged in any
manner. Return appliance to the nearest authorized service
facility for examination, repair or adjustment.
Z The use of an accessory attachment not recommended by the
appliance manufacturer may result in fire, electric shock, or injury
to persons.
Z Do not use outdoors.
Z Do not let the cord hang over the edge of a table or counter, or
touch hot surfaces.
Z Do not place on or near a hot gas or electric burner, or in a heated
oven.
Z To disconnect, turn any control to ‘OFF’ then remove plug from
wall outlet.
Z Do not use appliance for other than intended use.
Z Use extreme caution when dispensing hot steam, hot water or
hot coffee.
Z For household use only.
Follow the basic safety
precautions
5
IMPORTANT SAFEGUARDS
pt
es
en
it
fr
ru
en
de
The appliance is designed and intended for household use only. It shall
only be used for coffee preparation, according to these instructions. Use
for any other purpose will be deemed improper. JURA Elektroapparate
AG cannot accept any responsibility for the consequences of improper
use.
People, including children, who
Z do not have the physical, sensory or mental capabilities to use the
appliance safely or
Z are inexperienced or lack knowledge in how to use the appliance
safely
must be supervised by a responsible person when using it, or must be
instructed in how to use it correctly.
Z The power cord is provided to reduce the risk resulting from
becoming entangled in or tripping over a long cord.
Z The cord shall be arranged so that it will not drape over the
counter top or table top where it can be pulled on by children or
tripped over.
Z This appliance has a 3-pin grounded plug.
Z Do not modify the plug in any way.
Do NOT use extension cords.
If the user chooses to use an extension cord,
Z the marked electrical rating of the extension cord shall be at least
as great as the electrical rating of the appliance, and
Z if the appliance is of the grounded type, the extension cord shall
be a grounding type 3-wire cord, and
Z the longer cord shall be arranged so that it will not drape over the
counter top or tabletop where it can be pulled on by children or
tripped over.
To reduce the risk of fire or electric shock, DO NOT remove any service
covers. DO NOT modify the appliance in any way that is not described
in these instructions. NO user serviceable parts included. Repair MUST
be done by authorized personnel only.
In the event of signs of damage, for example if there is a smell of
burning, unplug the machine immediately from outlet and contact
JURA customer service.
Intended use
Special power cord set
instructions
J WARNING
6
IMPORTANT SAFEGUARDS
This appliance is for household use. Any servicing other than cleaning
and user maintenance shall be performed by an authorized service
representative:
Z Do not immerse base in water or try to disassemble.
Z Do not put the appliance or any individual parts in the dishwasher.
Z Check voltage to be sure that the voltage indicated on the name
plate complies with your voltage. The name plate is located on
the underside of the appliance.
Z Never use warm or hot water to fill the water container. Use cold
water only.
Z Keep your hands and the cord away from hot parts of the
appliance during operation.
Z Never clean with scouring powders or hard implements.
Z Ensure that the ventilation slots are not covered.
Z Never pull out the drip tray during the brewing process. Only pull
the drip tray when the display instructs you or when the appliance
is ready for use.
Z Never fill instant coffee, chocolate mix etc. into the bean container
or ground coffee funnel (filler funnel for ground coffee). It will
damage the functioning of the brewing chamber.
Z Never fill sugar coated coffee beans into the bean container. In
case of doubt, call your dealer.
Z Never fill anything other than coffee beans into the bean
container (no chocolate, no rice, no nuts, no spices, nothing other
than roasted coffee beans).
Z Never fill frozen beans into the bean container. If you store beans
in the freezer, let them thaw 3 to 4 hours before filling them into
the bean container.
Z Never fill anything but fresh, cold and clean water into the water
tank, except when decalcifying.
Z Never use mineral or carbonated water. You can use tap water,
bottled water, spring water and reverse osmosis water.
Z Never do anything with the machine which is not described in
these instructions. In case of doubt, call your dealer.
J CAUTION
NOTICE
NEVER DO
(or you will void your
warranty protection):
7
pt
es
en
it
fr
ru
en
de
– intentionally blank –
8
Control elements
Control elements
2
3
5
4
6
8
1
10
9
7
J HOT
J HOT
1 Water tank
2 Power cord (back of the machine)
3 Milk pipe
4 Coffee grounds container
5 Drip tray
6 Bean container with aroma preservation cover
7 Q On/Off button
8 Hot-water spout
9 Height-adjustable dual spout
10 Cup platform
9
Control elements
pt
es
en
it
fr
ru
en
de
8
10
3
4
1
2
7
9
11
5
6
12
13
1 Cover for powder chute for ground coffee
2 Powder chute for ground coffee
3 Display
4 é Milk Foam button
5 / Cappuccino button
6 ( Latte Macchiato button
7 Rotary Switch status display
8 Cover cap for grinder adjustment switch
9 Grinder adjustment switch
10 Rotary Switch
11 x Hot Water button
12 < Espresso button
13 > Coffee button
Accessories
Container for milk system
cleaning
Measuring spoon for ground
coffee
Filler funnel for ground coffee
6
10
1 Preparing and using for the first time
1 Preparing and using for the
first time
3-color plain text display
Your ENA features a 3-color plain text display. The
colors of the display texts have the following
meanings:
U
Green: The ENA is ready for use.
U
Red: The ENA is prompting you to perform
some action.
U
Yellow: You are in programming mode.
Setting up the machine
When setting up your ENA, please note the
following:
U
Place the ENA on a horizontal surface that is
not sensitive to water.
U
Choose a spot for your ENA which protects the
machine against overheating. Ensure that the
ventilation slots are not covered.
Filling the bean container
NOTICE
Coffee beans which have been treated with
additives (e.g. sugar), ground coffee or freeze-dried
coffee will damage the grinder.
T Only use untreated roasted coffee beans to
refill the bean container.
T Remove the aroma preservation cover of the
bean container.
T Remove any dirt or foreign objects from
inside the bean container.
T Fill the bean container with coffee beans.
T Close the bean container.
First-time use
When using the machine for the first time, you can
choose whether you want to operate ENA with or
without the CLEARYL Blue filter cartridge. If the
water hardness is 10°dH or more, we recommend
using the filter cartridge. If you do not know the
hardness of your water, you can find this out first
(see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
J WARNING
If the machine is operated with a defective power
cord, there is a danger of potentially fatal electric
shock.
T Never use a machine which is damaged.
T Never use a machine which has a defective
power cord.
E The water volume is given as standard in
OZ.
You can change this setting to
ML in
programming mode (see Chapter 4
‘Permanent settings in programming
mode – Unit for amount of water’).
Precondition:The bean container has been filled.
T Insert the power plug into a power socket.
T Press the On/Off button Q to switch the
machine on.
LANGUAGE ENGLISH
T Press the Rotary Switch to confirm the
language setting.
OK, the language is now set.
FILTERp/ YESp
11
1 Preparing and using for the first time
pt
es
en
it
fr
ru
en
de
E Now decide whether you want to operate
your ENA with or without a CLEARYL Blue
filter cartridge.
First-time use with filter cartridge
activation
T Press the Rotary Switch.
OK
INSERT FILTER
T Remove the water tank.
T Open the filter holder.
T Insert the filter cartridge into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
INSERT FILTER
T Place a receptacle (at least 17 oz or 500 ml)
under the hot-water and dual spout.
T Press the Rotary Switch.
FILTER RINSING, water flows out of
the hot-water spout.
E You can interrupt rinsing of the filter at any
time by pressing any button. Press the
Rotary Switch to continue rinsing of the
filter.
E The water may be slightly discolored. This is
not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically.
SYSTEM FILLING, water flows out of
the dual spout.
HEATING
READY
First-time use without filter cartridge
activation
T Turn the Rotary Switch until FILTER-/
NO- is displayed.
T Press the Rotary Switch.
OK
16°dH
T Turn the Rotary Switch to change the water
hardness setting, e.g. to
25°dH.
T Press the Rotary Switch.
OK
FILL WATER TANK
T Remove the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
PRESS ROTARY
12
1 Preparing and using for the first time
T Place a receptacle under the dual spout and
the hot-water spout.
T Press the Rotary Switch.
SYSTEM FILLING, the system fills up
with water.
HEATING
READY
Determining the water hardness
You can find out what the water hardness is by
using the Aquadur® test strip supplied as standard.
T Hold the test strip briefly (for one second)
under running water.
T Shake off the water.
T Wait for about one minute.
T You will then be able to read the degree of
water hardness from the discoloration of the
Aquadur® test strip and the description on
the packaging.
The water hardness can be adjusted on a
continuous scale between 1 °dH and 30 °dH.
Level Display
German
Degree (°dH)
Degrees of
general hardness
(°dGH)
Parts per
million (ppm)
Indicator Strip number
of ‘reddish’ fields
Not active – – – –
Very soft water <3 <3 < 53.4 None
Soft water > 4 > 4 > 71 1
Hard water > 8.4 > 8.4 > 150 2
Very hard water > 14 > 14 > 250 3
13
2 Preparation
pt
es
en
it
fr
ru
en
de
Connecting milk
Your ENA creates fine, creamy, feather-light milk
foam with a perfect consistency. The most
important requirement for frothing milk is a milk
temperature of 39–46 °F (4–8 °C). We would
therefore recommend using a milk cooler (e.g. the
Cool Control Basic) or a vacuum milk container.
T Remove the protective cover of the dual
spout.
T Connect the milk pipe to the dual spout.
T Connect the other end of the milk pipe to a
milk container or immerse it in a milk
carton.
E Ensure that the filling height of the milk is
no higher than the milk pipe connection on
the dual spout.
2 Preparation
J WARNING
Hot Coffee can cause scalding. Scalding is a serious
burn.
T Use extreme care when handling hot liquid.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area
with cold water and seek medical attention.
T Keep children AWAY.
E You can interrupt preparation at any time
while a specialty coffee, specialty coffee with
milk or hot water is being prepared. Just
press any button.
E Before and during the grinding operation
you can change the coffee strength of
espresso <, coffee >, cappuccino / and
latte macchiato ( by turning the Rotary
Switch.
E During preparation, you can change the
preset amounts (e.g. amount of milk foam
or water) by turning the Rotary Switch.
E You can follow the current status of
preparation on the progress bar.
E The water volume is given as standard in
OZ.
You can change this setting to
ML in
programming mode (see Chapter 4
‘Permanent settings in programming
mode – Unit for amount of water’).
Coffee tastes best served hot. A cold porcelain cup
cools the beverage – and impairs the taste. We
therefore recommend prewarming the cups. The
full coffee aroma can develop only in prewarmed
cups. You can purchase a JURA cup warmer from
your specialized dealer.
You can make permanent settings for all products
in programming mode (see Chapter 4 ‘Permanent
settings in programming mode – Products’).
14
2 Preparation
Espresso, coffee
Preparation of espresso < and coffee > follows
this model.
Example:Proceed as follows to prepare one coffee.
Precondition:
READY is displayed.
T Place a cup under the dual spout.
> T Press the Coffee button to start preparation.
COFFEE, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY
Latte macchiato, cappuccino
Your ENA can prepare a latte macchiato or
cappuccino at the touch of a button. There is no
need to move the glass or cup.
Latte macchiato ( and cappuccino / are
prepared following this model.
Example:Proceed as follows to prepare one latte
macchiato.
Precondition:
READY is displayed. Milk is
connected to the dual spout.
T Place a glass under the dual spout.
( T Press the Latte Macchiato button.
LATTE MAC., the milk foam is prepared.
Preparation stops automatically when the
preset amount of milk is reached.
PAUSE
E There is a short interval while the hot milk
separates from the milk foam. This allows
the typical layers of a latte macchiato to
form. You can choose the length of this
interval in programming mode (see
Chapter 4 ‘Permanent settings in
programming mode – Products’).
LATTE MAC., coffee preparation starts.
The preset amount of water flows into the
glass.
Preparation stops automatically.
READY / M-RINSE
Milk foam
Precondition:READY is displayed. Milk is
connected to the dual spout.
T Place a cup under the dual spout.
é T Press the Milk Foam button.
MILK, the milk foam is prepared.
Preparation stops automatically when the
preset amount of milk is reached.
READY / M-RINSE
Ground coffee
You can choose to use a second coffee variety, for
example decaffeinated coffee, with the powder
chute for ground coffee.
E Never add more than one level measuring
spoon of ground coffee.
E Use ground coffee which is not ground too
finely. Very fine coffee can block up the
system so that the coffee only comes out in
drips.
E If you did not fill the machine with a
sufficient amount of ground coffee,
NOT
ENOUGH POWDER is displayed and the
ENA stops the operation.
E The desired specialty coffee must be
prepared within approximately one minute
after filling with the ground coffee.
Otherwise the ENA stops the operation and
is once more ready for use.
The preparation of coffee, espresso, cappuccino
and latte macchiato with ground coffee follows this
model.
Example:Prepare a cup of coffee using ground
coffee.
Precondition:
READY is displayed.
T Place a cup under the dual spout.
T Open the powder chute for ground coffee.
FILL POWDER
15
2 Preparation
pt
es
en
it
fr
ru
en
de
T Place the filler funnel for ground coffee on
the powder chute.
T Place one level measuring spoon of ground
coffee into the filler funnel.
T Close the powder chute for ground coffee.
SELECT BUTTON
> T Press the Coffee button to start preparation.
COFFEE, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY
Permanently setting the amount of water
for the cup size
It is easy to make permanent settings for the
amount of water for all specialty coffees and hot
water according to the cup size. Adjust the amount
once as shown in the following example. Every
time you prepare a drink in the future, this amount
will be dispensed.
Example:Permanently adjust the amount of
cappuccino to the cup size.
Precondition:
READY is displayed. Milk is
connected to the dual spout.
T Place a cup under the dual spout.
/ T Press and hold the Cappuccino button until
ENOUGH MILK? appears.
/ T Release the Cappuccino button.
The milk foam is prepared.
T Press any button as soon as there is
sufficient milk foam in the cup.
OK
ENOUGH COFFEE?, the coffee flows
into the cup.
T Press any button as soon as there is
sufficient coffee in the cup.
OK, CAPPUCCINO, the set amounts for
one cappuccino are permanently stored.
READY
E You can alter this setting at any time by
repeating the above procedure.
Adjusting the grinder
You can adjust the grinder on a continuous scale to
suit the degree of roast of your coffee.
NOTICE
If you adjust the consistency of grind when the
grinder is not operating, the grinder adjustment
switch could be damaged.
T Only adjust the consistency of grind when
the grinder is running.
The consistency of grind is correct if the coffee
flows regularly from the dual spout. In addition a
fine, thick crema forms.
Example:Change the consistency of grind during
the preparation of an espresso.
T Place a cup under the dual spout.
T Open the cover cap of the grinder
adjustment switch.
< T Press the Espresso button to start
preparation.
T Turn the grinder adjustment switch to the
desired position while the grinder is
running.
The preset amount of water flows into the
cup. Preparation stops automatically.
READY
16
3 Daily operation
Hot water
J
CAUTION
There is a danger of scalding from hot water
splashes.
T Avoid direct contact with the skin.
Precondition:
READY is displayed.
T Place a cup under the hot-water spout.
x T Press the Hot Water button.
WATER, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY
3 Daily operation
Filling the water tank
Daily maintenance of the machine and hygiene
when handling milk, coffee and water are key to a
perfect coffee result in the cup every time. You
should therefore change the water daily.
NOTICE
Milk, sparkling mineral water or other liquids can
damage the water tank or the machine.
T Only fill the water tank with fresh, cold water.
T Remove the water tank and rinse with cold
water.
T Fill the water tank with fresh, cold water and
reinsert it.
Switching on the machine
T Place a receptacle under the dual spout.
Q T Press the On/Off button to switch the
machine on.
RINSING, the system rinses itself. The
operation stops automatically.
READY
Daily maintenance
To ensure that you get many years of reliable
service out of your ENA and to guarantee the
optimum coffee quality, the machine requires daily
maintenance.
T Remove the drip tray.
T Empty the coffee grounds container and
drip tray and rinse with warm water.
E Always empty the coffee grounds container
when the machine is switched on. This is
the only way of resetting the coffee grounds
counter.
T Reinsert the coffee grounds container and
the drip tray.
T Rinse the water tank with clean water.
T Dismantle and rinse the dual spout (see
Chapter 5 ‘Maintenance – Dismantling and
rinsing the dual spout’).
T Wipe the surface of the machine with a
clean, soft, damp cloth (e.g. microfiber
cloth).
Regular maintenance
Carry out the following maintenance actions
regularly or as required:
U
In the interests of hygiene, we recommend
changing the milk pipe and interchangeable
milk spout on a regular basis (approximately
every 3 months). Replacements are available
from specialized dealers.
U
Clean the inside of the water tank, e.g. with a
brush. Further information about the water
tank is provided in these instructions for use
17
4 Permanent settings in programming mode
pt
es
en
it
fr
ru
en
de
(see Chapter 5 ‘Maintenance – Descaling the
water tank’).
U
Traces of milk and coffee may stick to the top
and bottom of the cup platform. If this
happens, clean the cup platform.
Switching off the machine
When the ENA is switched off, the system is
automatically rinsed if a specialty coffee has been
prepared. If milk has been prepared, you will also
be prompted to clean the milk system.
Precondition:
READY is displayed.
T Place a receptacle under the dual spout.
Q T Press the On/Off button to switch the
machine off.
E If milk has been prepared, you will be
prompted to clean the milk system
(M-CLEAN / START ?). After 10 seconds
the switch-off process continues
automatically.
RINSING, the system rinses itself. The
operation stops automatically. Your ENA is
switched off.
4 Permanent settings in
programming mode
Products
J WARNING
Hot coffee, hot steam and hot water can cause
scalding. Scalding is a serious burn.
T Use extreme care when handling hot liquid
or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area
with cold water and seek medical attention.
T Keep children AWAY.
You can make the following permanent settings:
U
Espresso
U
Amount of water: 0.5OZ – 2.5OZ
(15 ml – 80 ml)
U
Coffee strength: 10 levels
U
Temperature: NORMAL, HIGH
U
Coffee
U
Amount of water: 0.5OZ – 8.0OZ
(25 ml – 240 ml)
U
Coffee strength: 10 levels
U
Temperature: NORMAL, HIGH
U
Latte macchiato and cappuccino
U
Amount of milk foam: 3SEC – 120SEC
U
Interval: 0SEC – 60SEC
U
Coffee strength: 10 levels
U
Amount of water: 0.5OZ – 8.0OZ
(25 ml – 240 ml)
U
Temperature: NORMAL, HIGH
U
Milk foam
U
Amount of milk foam: 3SEC – 120SEC
U
Hot water
U
Amount of water: 0.5OZ – 15.0OZ
(25 ml – 450 ml)
Permanent settings in programming mode always
follow the same model.
Example:Permanently change the coffee strength
(
FLAVOUR) of an espresso.
Precondition:
READY is displayed.
T Press and hold the Rotary Switch until
RINSE appears.
T Turn the Rotary Switch until
PRODUCT is
displayed.
T Press the Rotary Switch to enter the
program item.
SELECT BUTTON
E Next select the button of the product for
which you would like to make settings. No
product is prepared at this point.
< T Press the Espresso button.
ESPRESSO
WATER
18
4 Permanent settings in programming mode
T Turn the Rotary Switch until FLAVOUR is
displayed.
T Press the Rotary Switch to enter the
program item.
nnnnnnkkkk (Example)
T Turn the Rotary Switch to change the
setting.
T Press the Rotary Switch to confirm the
setting.
OK, the coffee strength is now set.
FLAVOUR
T Turn the Rotary Switch until EXIT is
displayed.
T Press the Rotary Switch to exit the program
item.
PRODUCT
T Turn the Rotary Switch until EXIT is
displayed.
T Press the Rotary Switch to exit programming
mode.
READY
Setting the water hardness
E If you are using the CLEARYL Blue filter
cartridge and have activated it in
programming mode, you will not be able
to adjust the water hardness.
The harder the water is, the more frequently the
ENA needs to be descaled. It is therefore important
to set the water hardness accurately.
The water hardness can be adjusted on a continu-
ous scale between 1 °dH and 30 °dH.
Precondition:
READY is displayed.
T Press and hold the Rotary Switch until
RINSE appears.
T Turn the Rotary Switch until
HARDNESS
is displayed.
T Press the Rotary Switch to enter the
program item.
16°dH (Example)
T Turn the Rotary Switch to change the
setting.
T Press the Rotary Switch to confirm the
setting.
OK, the water hardness is now set.
HARDNESS
T Turn the Rotary Switch until EXIT is
displayed.
T Press the Rotary Switch to exit programming
mode.
READY
Automatic switch-off
By instructing your ENA to automatically switch
itself off, you can cut down your energy
consumption. If this function is activated, your ENA
switches off automatically after the preset time
following the last action on the machine.
The automatic switch-off can be set to between
15minutes and 9hours.
Precondition:
READY is displayed.
T Press and hold the Rotary Switch until
RINSE appears.
T Turn the Rotary Switch until
OFF AFTER
is displayed.
T Press the Rotary Switch to enter the
program item.
2HRS (Example)
T Turn the Rotary Switch to change the
setting.
T Press the Rotary Switch to confirm the
setting.
OK, the switch-off time is now set.
OFF AFTER
T Turn the Rotary Switch until EXIT is
displayed.
T Press the Rotary Switch to exit programming
mode.
READY
Unit for amount of water
You can change the unit for the amount of water
from ‘oz’ to ‘ml’.
19
5 Maintenance
pt
es
en
it
fr
ru
en
de
Precondition:READY is displayed.
T Press and hold the Rotary Switch until
RINSE appears.
T Turn the Rotary Switch until
DISPLAY is
displayed.
T Press the Rotary Switch to enter the
program item.
OZ (Example)
T Turn the Rotary Switch to change the
setting.
T Press the Rotary Switch to confirm the
setting.
OK, the unit for the amount of water is now
set.
DISPLAY
T Turn the Rotary Switch until EXIT is
displayed.
T Press the Rotary Switch to exit programming
mode.
READY
Language
In this program item you can set the language
used by your ENA.
Example:Change the language from
ENGLISH
to
DEUTSCH.
Precondition:
READY is displayed.
T Press and hold the Rotary Switch until
RINSE appears.
T Turn the Rotary Switch until
LANGUAGE
is displayed.
T Press the Rotary Switch to enter the
program item.
ENGLISH
T Turn the Rotary Switch until DEUTSCH is
displayed.
T Press the Rotary Switch to confirm the
setting.
OK, the language is now set.
SPRACHE
T Turn the Rotary Switch until EXIT is
displayed.
T Press the Rotary Switch to exit programming
mode.
BEREIT
5 Maintenance
J WARNING
Use of maintenance products that are harmful
to health and discharge of liquids during
maintenance program. Harmful if swallowed.
Irritating to eyes and skin.
T Keep children AWAY.
T Keep children away from the machine while
it is performing a maintenance program.
T Avoid contact with skin and eyes.
T Avoid generation of dust. Do not inhale dust.
T When using do not eat or drink.
T Keep maintenance products away from food,
drink and animal food.
T Keep container tightly closed and dry. Keep
in a cool place.
Your ENA has the following integrated
maintenance programs:
U
Rinsing the machine (RINSE)
U
Rinsing the milk system in the dual spout
(
M-RINSE)
U
Cleaning the milk system in the dual spout
(
M-CLEAN)
U
Changing the filter (FILTER) (only if filter is
activated)
U
Cleaning the machine (CLEAN)
U
Descaling the machine (DE-SCALE)
E Clean or descale the machine, rinse the milk
system or change the filter when you are
prompted to do so.
E In the interests of hygiene, you should clean
the milk system daily when you have been
preparing milk.
E You can start the maintenance programs at
any time in programming mode (program
item
RINSE).
20
5 Maintenance
Rinsing the machine
Precondition:READY is displayed.
T Place a receptacle under the dual spout.
T Press and hold the Rotary Switch until
RINSE appears.
T Press the Rotary Switch to enter the
program item.
M-CLEAN
T Turn the Rotary Switch until RINSE is
displayed.
T Press the Rotary Switch to initiate the rinse
operation.
RINSING, the system rinses itself. The
operation stops automatically.
READY
Rinsing the milk system
After each milk preparation, the ENA prompts you
to perform a milk system rinse.
Precondition:
READY / M-RINSE is displayed.
T Place a receptacle under the dual spout.
T Press the Rotary Switch to start milk system
rinsing.
RINSING, the milk system is rinsed. The
rinse stops automatically.
READY appears
on the display.
Cleaning the milk system
To ensure that the milk system in the dual spout
always works properly, you must clean it daily
when you have been preparing milk.
J WARNING
Non-recommended cleaning agents will not
optimally remove milk residues. This may cause
the cappuccino frother to become blocked and fly
off the machine. Discharge of hot steam.
T Use only original JURA milk system cleaner.
J WARNING
Harmful and irritating cleaning agent. Harmful if
swallowed. Irritating to eyes and skin.
T Keep children AWAY.
T Avoid contact with skin and eyes.
T After contact with skin, wash immediately
with plenty of water. In case of skin irritation,
seek medical advice.
T After eye contact, immediately flush eyes
with plenty of water and seek medical
advice.
T If swallowed, rinse mouth immediately and
drink large quantities of water. Do not
induce vomiting. Seek medical advice
immediately and show label.
E JURA milk system cleaner is available from
specialized dealers.
E To clean the milk system, use the container
supplied.
T Press and hold the Rotary Switch until
RINSE appears.
T Press the Rotary Switch to enter the
program item.
M-CLEAN
T Press the Rotary Switch to start milk system
cleaning.
AGENT FOR M-CLEAN
T Remove the milk pipe from the milk
container or carton.
21
5 Maintenance
pt
es
en
it
fr
ru
en
de
T Fill the front part of the container (indicated
by 6) with 8.5 oz (250ml) fresh water and
1 capful of milk system cleaner.
T Place the container under the dual spout.
T Connect the milk pipe to the container.
E To connect the milk pipe to the container
correctly, the pipe must be fitted with a
connector.
T Press the Rotary Switch.
CLEANING, the milk system and the pipe
are cleaned.
The operation is interrupted,
WATER FOR
M-CLEAN.
T Rinse the container thoroughly and fill the
front part with 8.5 oz (250ml) fresh water.
T Place the container under the dual spout
and connect the milk pipe with the container
again.
T Press the Rotary Switch.
CLEANING, the milk system and the pipe
are rinsed with fresh water.
The operation stops automatically.
READY
6
Dismantling and rinsing the dual spout
The dual spout must be dismantled and rinsed
daily if milk has been prepared to make sure it
functions perfectly and also in the interests of
hygiene.
T Remove the milk pipe and rinse thoroughly
under running water.
T Press the releasing devices and pull the dual
spout down and off.
T Push the milk system down and remove it.
T Dismantle the milk system into its individual
parts.
T Rinse all parts under running water. If a lot of
milk residue has dried on, first soak the
individual parts in a solution of 8.5 oz
(250ml) of cold water and 1capful of JURA
milk system cleaner and then rinse
thoroughly.
22
5 Maintenance
T Fit the air intake pipe.
T Reassemble the milk system, noting the
numbering on the parts.
T Insert the assembled individual parts into
the dual spout and press them together.
They will click into place audibly.
T Fit the dual spout on the machine. It will
click into place audibly.
Inserting and activating the filter
Your ENA no longer has to be descaled if you are
using the CLEARYL Blue filter cartridge. If you did
not activate the filter cartridge the first time you
used the machine, you can do this now as follows.
E Perform the ‘inserting the filter’ operation
without any interruptions. This will ensure
that your ENA always produces its best.
1
2
Precondition:READY is displayed.
T Press and hold the Rotary Switch until
RINSE appears.
T Turn the Rotary Switch until
FILTER- is
displayed.
T Press the Rotary Switch to enter the
program item.
NO-
T Turn the Rotary Switch until YESp is
displayed.
T Press the Rotary Switch to confirm the
setting.
OK
INSERT FILTER
T Remove and empty the water tank.
T Open the filter holder.
T Insert the filter cartridge into the water tank,
exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
T Fill the water tank with fresh, cold water and
reinsert it.
T Place a receptacle (at least 17 oz or 500ml)
under the hot-water spout.
23
5 Maintenance
pt
es
en
it
fr
ru
en
de
T Press the Rotary Switch.
FILTER RINSING, water flows out of
the hot-water spout.
E You can interrupt rinsing of the filter at any
time by pressing any button. Press the
Rotary Switch to continue rinsing of the
filter.
E The water may be slightly discolored. This is
not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically.
HEATING
READY
The filter is now activated.
Changing the filter
E After 2000 oz (60 liters) of water have flowed
through, the filter will cease to work. Your
ENA will automatically prompt you to
change the filter.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
E If the CLEARYL Blue filter cartridge is not
activated in programming mode, you will
not be prompted to change the filter.
Precondition:
FILTER/ READY is displayed.
T Press the Rotary Switch.
INSERT FILTER
T Remove and empty the water tank.
T Open the filter holder and remove the old
filter cartridge.
T Insert a new filter cartridge into the water
tank, exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
T Fill the water tank with fresh, cold water and
reinsert it.
T Place a receptacle (at least 17 oz or 500ml)
under the hot-water spout.
T Press the Rotary Switch.
FILTER RINSING, water flows out of
the hot-water spout.
E You can interrupt rinsing of the filter at any
time by pressing any button. Press the
Rotary Switch to continue rinsing of the
filter.
E The water may be slightly discolored. This is
not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically.
HEATING
READY
Cleaning the machine
After 180preparations or 80switch-on rinses, the
ENA will prompt you to clean it.
J WARNING
Non-recommended (e.g. liquid) cleaning agents
may contain substances that could damage the
machine or leave residues.
T Use only original JURA cleaning tablets.
These are specially formulated for your
machine.
24
5 Maintenance
J WARNING
Harmful and irritating cleaning agent. Harmful if
swallowed. Irritating to eyes and skin.
T Keep children AWAY.
T Avoid contact with skin and eyes.
T Avoid generation of dust. Do not inhale dust.
T After contact with skin, wash immediately
with plenty of water. In case of skin irritation,
seek medical advice.
T After eye contact, immediately flush eyes
with plenty of water and seek medical
advice.
T If swallowed, rinse mouth immediately and
drink large quantities of water. Do not
induce vomiting. Seek medical advice
immediately and show label.
E The cleaning program lasts approximately
15 minutes.
E Do not interrupt the cleaning program. The
quality of cleaning will be impaired if you do
so.
E JURA cleaning tablets are available from
specialized dealers.
Precondition:
CLEAN/ READY is displayed.
T Press the Rotary Switch.
EMPTY TRAY
T Empty the drip tray and coffee grounds
container and reinsert them.
PRESS ROTARY
T Place a receptacle under the dual spout.
T Press the Rotary Switch.
CLEANING, water flows out of the dual
spout.
The operation is interrupted,
ADD
TABLET
.
T Open the powder chute for ground coffee
and drop in a JURA cleaning tablet.
T Close the powder chute for ground coffee.
PRESS ROTARY
T Press the Rotary Switch.
CLEANING, water flows out of the dual
spout repeatedly.
EMPTY TRAY
T Empty the drip tray and coffee grounds
container and reinsert them.
READY
Descaling the machine
The ENA builds up deposits of limescale over time
and automatically prompts you to descale it when
necessary. The degree of calcification depends on
the hardness of your water.
E If you use a CLEARYL Blue filter cartridge and
this is activated, you will not be prompted to
descale.
J WARNING
Non-recommended descaling agents (e.g. vinegar)
may contain substances that could damage the
machine or leave residues.
T Use only original JURA descaling tablets.
These are specially formulated for your
machine.
25
5 Maintenance
pt
es
en
it
fr
ru
en
de
J WARNING
Harmful and irritating descaling agent. Harmful if
swallowed. Irritating to eyes and skin.
T Keep children AWAY.
T Avoid contact with skin and eyes.
T Avoid generation of dust. Do not inhale dust.
T After contact with skin, wash immediately
with plenty of water. In case of skin irritation,
seek medical advice.
T After eye contact, immediately flush eyes
with plenty of water. Remove contact lenses.
Seek medical advice.
T If swallowed, rinse mouth immediately and
drink large quantities of water. Do not
induce vomiting. Seek medical advice
immediately and show label.
NOTICE
If the descaling operation is interrupted, there may
be damage to the machine.
T Allow the descaling program to run to the
end.
E The descaling program lasts approximately
40minutes.
E JURA descaling tablets are available from
specialized dealers.
E If the descaling agent comes into contact
with sensitive surfaces (e.g. marble), damage
cannot be ruled out. Clean up any splashes
immediately.
Precondition:
DE-SCALE/ READY is
displayed.
T Press the Rotary Switch.
EMPTY TRAY
T Empty the drip tray and coffee grounds
container and reinsert them.
AGENT IN TANK
T Remove and empty the water tank.
T Completely dissolve 3JURA descaling tablets
in a receptacle holding 17 oz (500ml) of
water. This may take several minutes.
T Pour the solution into the empty water tank
and reinsert the tank.
PRESS ROTARY
T Place a receptacle under the hot-water
spout.
T Press the Rotary Switch.
DE-SCALING, water flows out of the
hot-water spout repeatedly.
EMPTY TRAY
T Empty the drip tray and coffee grounds
container and reinsert them.
FILL WATER TANK
T Empty the receptacle and place it under the
dual and hot-water spout.
26
5 Maintenance
T Remove the water tank, rinse thoroughly, fill
with fresh, cold water and reinsert.
PRESS ROTARY
T Press the Rotary Switch.
DE-SCALING, water flows out of the
dual and hot-water spout.
The operation is interrupted,
EMPTY
TRAY.
T Empty the drip tray and coffee grounds
container and reinsert them.
READY
E If the descaling operation stops
unexpectedly, rinse the water tank
thoroughly.
Descaling the water tank
Limescale deposits may form in the water tank. To
ensure correct function of the machine, descale
the water tank from time to time.
T Remove the water tank.
T If you use a CLEARYL Blue filter cartridge,
remove it.
T Completely fill the water tank and dissolve
3 JURA descaling tablets in it.
T Leave the water tank with the descaling
solution for several hours (e.g. overnight).
T Empty the water tank and rinse thoroughly.
T If you use a CLEARYL Blue filter cartridge,
reinsert it.
T Fill the water tank with fresh, cold water and
reinsert it.
Cleaning the bean container
Coffee beans may be covered with a slight oil film
which remains on the walls of the bean container.
These traces may negatively affect the coffee
result. For this reason clean the bean container
from time to time.
Q T Press the On/Off button to switch the
machine off.
T Disconnect the power plug.
T Remove the bean container cover.
T Remove the coffee beans with a vacuum
cleaner.
T Clean the bean container with a soft, dry
cloth.
T Fill the bean container with fresh coffee
beans, then close the bean container cover.
27
6 Display messages
pt
es
en
it
fr
ru
en
de
6 Display messages
Message Cause/Result Action
FILL WATER
TANK
The water tank is empty or not correctly
inserted. You cannot prepare any
products.
T Fill the water tank (see Chapter 3 ‘Daily
operation – Filling the water tank’).
T Insert the water tank.
EMPTY
GROUNDS
The coffee grounds container is full. No
specialty coffees can be prepared, but
hot water preparation is possible.
T Empty the coffee grounds container
and the drip tray (see Chapter 3 ‘Daily
operation – Daily maintenance’).
TRAY
MISSING
The drip tray is not inserted correctly or
is not inserted at all. You cannot prepare
any products.
T Insert the drip tray.
FILL BEANS
The bean container is empty. No
specialty coffees can be prepared, but
hot water preparation is possible.
T Fill the bean container (see Chapter 1
‘Preparing and using for the first time –
Filling the bean container’).
CLOSE
COVER
The aroma preservation cover for the
bean container is not fitted or not fitted
correctly.
TFit the aroma preservation cover
correctly.
PRESS
ROTARY
The ENA is prompting you to perform a
rinse or continue a maintenance
program that was already started.
T Press the Rotary Switch to start the
rinse or to continue the maintenance
program.
READY /
M-RINSE
The ENA requests a milk system rinse.
T Press the Rotary Switch to start milk
system rinsing.
READY/
CLEAN
The ENA is prompting you to clean it.
T Perform cleaning (see Chapter 5
‘Maintenance – Cleaning the machine’).
READY/
DE-SCALE
The ENA is prompting you to descale it.
T Perform descaling (see Chapter 5
‘Maintenance – Descaling the machine ’).
READY/
FILTER
The filter cartridge no longer works. The
ENA is prompting a filter change.
T Replace the CLEARYL Blue filter
cartridge (see Chapter 5 ‘Maintenance –
Changing the filter’).
NOT ENOUGH
POWDER
There is insufficient ground coffee in the
machine; the ENA stops the operation.
T The next time you prepare a beverage,
add more ground coffee (see Chapter 2
‘Preparation – Ground coffee’).
TOO HOT
The system is too hot to start a
maintenance program.
T Wait for several minutes until the
system has cooled or prepare a
specialty coffee or hot water.
28
7 Troubleshooting
7 Troubleshooting
Problem Cause/Result Action
Insufficient foam is
produced when the milk is
frothed, or milk sprays
from the dual spout.
The dual spout is dirty.
T Clean the dual spout (see Chapter 5
‘Maintenance – Cleaning the milk system’).
T Dismantle and rinse the dual spout. (see
Chapter 5 ‘Maintenance – Dismantling and
rinsing the dual spout’).
Coffee only comes out in
drips when it is being
prepared.
Coffee or ground coffee
has been ground too finely
and is blocking the system.
T Set the grinder to a coarser setting or use
coarser ground coffee (see Chapter 2
‘Preparation – Adjusting the grinder’).
Water hardness cannot be
adjusted.
The CLEARYL Blue filter
cartridge is activated.
T Deactivate the CLEARYL Blue filter
cartridge in programming mode.
FILL WATER TANK
is displayed although the
water tank is full.
The water tank float is
trapped.
T Descale the water tank (see Chapter 5
‘Maintenance – Descaling the water tank’).
Grinder is making a very
loud noise.
There are foreign objects
in the grinder.
T Contact customer support in your country
(see Chapter 11 ‘JURA contact details/ Legal
information’).
ERROR2 is displayed.
If the machine has been
exposed to the cold for a
long period of time,
heating may be disabled
for safety reasons.
T Warm the machine at room temperature.
Other
ERROR messages
are displayed.
–
T Switch off the ENA with the On/Off button.
T Contact customer support in your country
(see Chapter 11 ‘JURA contact details/ Legal
information’).
E If you were unable to solve the problem,
contact customer support in your country
(see Chapter 11 ‘JURA contact details/ Legal
information’).
29
8 Transport and environmentally friendly disposal
pt
es
en
it
fr
ru
en
de
8 Transport and environmentally
friendly disposal
Transport/ Emptying the system
Keep the packaging for your ENA. It should be used
to protect the machine during transport.
In order to protect the ENA from frost during
transport, the system must be emptied.
Precondition:
READY is displayed.
T Place a receptacle under the hot-water
spout.
x T Press the Hot Water button.
WATER, hot water flows out of the
hot-water spout.
T Remove and empty the water tank.
Hot water will continue to flow until the
system is empty.
FILL WATER TANK
Q T Press the On/Off button to switch the
machine off.
Disposal
Please dispose of old machines in an
environmentally neutral way.
H
9 Technical data
Voltage 120V~, 60Hz
Power 1450W
Conformity mark
Pump pressure static, max. 15bar
Holding capacity of
water tank (without
filter)
37.2 oz
(1.1l)
Holding capacity of bean
container
4.4 oz
(125g)
Holding capacity of
coffee grounds container
Approx. 10 servings
Cord length Approx. 43.3 in.
(1.1m)
Weight Approx. 20.7lb
(Approx. 9.4kg)
Dimensions (W×H×D) 9.0 × 12.7 × 17.5in.
(23 × 32.3 × 44.5cm)
Directives
The machine complies with the following
directives:
U
Standard UL 1082
U
Canadian Standard CSA C22.2 No. 64
30
10 Index
10 Index
A
Addresses 32
Aroma preservation cover
Bean container with aroma preservation cover
8
Automatic switch-off 18
B
Bean container
Bean container with aroma preservation cover
8
Cleaning 26
Filling 10
Bus bar
Technical data 29
Button
Cappuccino button 9
Coffee button 9
Espresso button 9
Hot Water button 9
Latte Macchiato button 9
Milk Foam button 9
On/Off button 8
C
Cappuccino 14
Cappuccino frother cleaning
Cleaning the milk system 20
Cappuccino frother rinsing
Rinsing the milk system 20
Cleaning
Bean container 26
Machine 23
CLEARYL Blue filter cartridge
Changing 23
Inserting and activating the filter 22
Coffee 14
Coffee grounds container 8
Consistency of grind
Adjusting the grinder 15
Grinder adjustment switch 9
Contact details 32
Cup platform 8
Customer support 32
D
Descaling
Machine 24
Water tank 26
Display 9, 10
Display messages 27
Disposal 29
Drip tray 8
Dual spout
Dismantling and cleaning 21
Height-adjustable dual spout 8
E
Emptying the system 29
Errors
Troubleshooting 28
Espresso 14
F
Filler funnel
Filler funnel for ground coffee 9
Filling
Bean container 10
Water tank 16
Filter
Changing 23
Inserting and activating the filter 22
First-time use 10
With filter cartridge activation 11
Without filter cartridge activation 11
G
Grinder adjustment switch 9
Ground coffee 14
Measuring spoon for ground coffee 9
Powder chute for ground coffee 9
H
Hotline 32
Hot water 16
Hot-water spout 8
I
Important safeguards
Safety 4
Instant coffee
Ground coffee 14
31
10 Index
pt
es
en
it
fr
ru
en
de
J
JURA
Contact details 32
L
Language 19
Latte macchiato 14
M
Machine
Cleaning 23
Descaling 24
Regular maintenance 16
Rinsing 20
Setting up 10
Switching off 17
Switching on 16
Maintenance 19
Daily maintenance 16
Regular maintenance 16
Measuring spoon for ground coffee 9
Messages, display 27
Milk
Connecting milk 13
Milk foam 14
Milk system
Cleaning 20
Rinsing 20
P
Permanently setting the water for the cup size
15
Permanent settings in programming mode 17
Powder chute
Powder chute for ground coffee 9
Power cord 8
Preparation 13, 14
Cappuccino 14
Coffee 14
Espresso 14
Ground coffee 14
Hot water 16
Latte macchiato 14
Milk foam 14
Problems
Troubleshooting 28
Programming mode 17
Automatic switch-off 18
Language 19
Products 17
Setting the water hardness 18
Unit for amount of water 18
R
Regular maintenance 16
Rinsing
Machine 20
Rotary Switch 9
Status display 9
Rotary Switch status display 9
S
Safety
Important safeguards 4
Settings
Permanent settings in programming mode
17
Setting up
Setting up the machine 10
Spout
Height-adjustable dual spout 8
Hot-water spout 8
Switching off 17
Switching on 16
Switch-off
Automatic switch-off 18
Symbol description 3
T
Technical data 29
Tel 32
Transport 29
Troubleshooting 28
U
Unit for amount of water 18
Use, First-time 10
W
Water hardness
Determining the water hardness 12
Setting the water hardness 18
Water tank 8
Descaling 26
Filling 16
32
11 JURA contact details/ Legal information
11 JURA contact details/ Legal
information
Headquarters
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Switzerland
USA: JURA Inc. Canada: FAEMA
Customer Service
Phone
E-Mail
1-800-220-5701
1-(855)-544-8600
info@juracanada.ca
Opening Hours (EST) Mon – Thu 9am – 9pm
Fri 9am – 8pm
Sat 9am – 5pm
Distributor Address
Phone
Fax
20 Craig Road
Montvale, NJ 07645
001 (201) 767-3999
001 (201) 767-9684
115 Matheson Boulevard East
Mississauga, Ontario, L4Z 1X8
1-(905)-501-8600
Internet www.us.jura.com www.ca.jura.com
@ You will find additional contact details for
your country at www.jura.com.
Technical changes
We reserve the right to make technical changes.
The diagrams used in these instructions for use are
for illustration purposes only and do not represent
the original colors of the machine. Some details of
your ENA may vary.
Feedback
Your opinion is important to us! Use the contact
details at www.jura.com.
Copyright
The instructions for use contain information which
is protected by copyright. It is not permitted to
photocopy these instructions for use or translate
them into another language without the prior
written consent of JURA Elektroapparate AG.
J72859/Micro 90/US-en-pt/201608
