Loading ...
Loading ...
Loading ...
154
Servicing Your Honda
Final Drive Oil
Oil Recommendation
Checking & Adding Oil
Refer to Safety Precautions on page 122.
RIGHT REAR
(Models equipped with center stand)
1. Place the motorcycle on its center stand on a firm, level surface.
(Models not equipped with center stand)
1. Hold the motorcycle upright on firm level ground.
2. Remove the oil fill cap.
3. Check the oil level. It should be flush with the lower edge of the oil fill hole.
4. If the level is low, check for oil leaks. Add the recommended oil through the
oil fill hole until it reaches the lower edge of the opening.
5. Install the oil fill cap.
type hypoid gear oil
viscosity (weight) SAE 80
oil fill cap
lower edge
Final Drive Oil
Loading ...
Loading ...
Loading ...