Loading ...
Loading ...
Loading ...
146
Servicing Your Honda
Engine Oil & Filter
Checking & Adding Oil
Refer to Safety Precautions on page 122.
RIGHT SIDE
(Models equipped with center stand)
1. Park your motorcycle on its center stand on a firm, level surface.
(Models not equipped with center stand)
1. Park your motorcycle on its side stand on a firm, level surface.
2. Remove the right engine side cover (page 136).
3. Start the engine and let it idle for 3 – 5 minutes. Make sure the low oil
pressure indicator goes off. If the indicator remains on, stop the engine
immediately.
4. Stop the engine and wait 2– 3 minutes.
(Models not equipped with center stand)
5. Hold the motorcycle in an upright position.
6. Remove the oil fill cap/dipstick and wipe it clean.
7. Insert the oil fill cap/dipstick until it seats, but don’t screw it in.
8. Remove the oil fill cap/dipstick and check the oil level.
• If the oil is at or near the upper level mark –– you do not have to add oil.
• If the oil is below or near the lower level mark –– add the recommended oil
until it reaches the upper level mark. (Do not overfill.)
9. Reinstall the oil fill cap/dipstick.
10.Reinstall the right engine side cover.
11.
Check for oil leaks.
upper level mark
lower level mark
oil fill cap/dipstick
Loading ...
Loading ...
Loading ...