Loading ...
Loading ...
Loading ...
5 (US)
US
Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the 1 (power) indicator will light up in green.
If the function tells you the monitor may have a potential failure,
consult your authorized Sony dealer.
If the picture disappears from the screen and the
1 (power) indicator is green
1 Turn off the 1 (power) switch and disconnect the
video signal cables from the monitor.
2 Turn the monitor on by pressing the 1 (power)
switch.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Displaying this monitor’s
information
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-HX73 or SDM-HX93
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
• Type of input signals (analog RGB/digital RGB)
Specifications
LCD panel
Panel type: a-Si TFT Active Matrix
Picture size:
17 inch (43 cm) (SDM-HX73)
19 inch (48 cm) (SDM-HX93)
Input signal format
RGB operating frequency*
Horizontal × Vertical:
28–80 kHz × 48-75 Hz (analog RGB)
28–64 kHz × 60 Hz (digital RGB)
Resolution
Horizontal × Vertical: Max.
1280 dots × 1024 lines
Input signal levels
Analog RGB video signal:
0.7 Vp-p, 75 Ω, positive
SYNC signal:
TTL level, 2.2 kΩ, positive or negative
(Separatehorizontal and vertical, or composite sync)
Digital RGB (DVI) signal: TMDS (Single link)
Audio input
Stereo minijack, 0.5 Vrms
Speaker output
3 W × 2
Headphones jack
Stereo minijack
Power requirements
SDM-HX73
100 – 240 V, 50 – 60 Hz, Max. 1.0 A
SDM-HX93
100 – 240 V, 50 – 60 Hz, Max. 1.1 A
Power consumption
Max. 50 W (SDM-HX73)
Max. 60 W (SDM-HX93)
Operating temperature
5 – 35
°C
Dimensions (width/height/depth)
Display (upright):
SDM-HX73
Approx. 414 × 418.5 × 232 mm
(16
3
/8 × 16
1
/2 × 9
1
/4 inches)
SDM-HX93
Approx. 466.5 × 468 × 265 mm
(18
3
/8 × 18
1
/2 × 10
1
/2 inches)
Mass
SDM-HX73
Approx. 6.5 kg (14 lb 5 oz)
SDM-HX93
Approx. 8.5 kg (18 lb 12 oz)
Plug & Play
DDC2B
Included items
See “Setup.”
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µsec, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
MENU
Example
Model name
Serial number
INFORMATION
MODEL : SDM-HX93
SER. NO : 1234567
MANUFACTURED : 2003-40
Week and
year of
manufacturee
Loading ...
Loading ...
Loading ...