Loading ...
Loading ...
3 (US)
US
Setup
Unpacking
Make sure your carton contains everything listed below.
• LCD display
•Power cord
• HD15-HD15 video signal cable (analog RGB)
• DVI-D video signal cable (digital RGB)
• Audio cord (stereo miniplug)
• CD-ROM (utility software for Windows/Macintosh, Operating
Instructions, etc.)
• Warranty card
• This Quick Setup Guide
Connecting your monitor
Connect your monitor to a computer or other equipment.
1 Slide up the back cover.
2 Connect your monitor to a computer.
Connecting a Macintosh computer
Connect the supplied video signal cable to a video output connector
on the computer. If necessary, use an adapter (not supplied). Connect
the adapter to the computer before connecting the video signal cable.
3 Connect the supplied power cord securely to the
monitor’s AC IN connector.
4 Connect the other end securely to a power outlet.
Note
For bundling the cords and cables, refer to the Operating Instructions on
the supplied CD-ROM.
Turning on the monitor and
computer
Turn on your monitor first, then a computer.
1 Press the 1 (power) switch on the front of the
monitor.
The 1 (power) indicator lights up in green.
2 Turn on the computer.
• Turn off the monitor, computer, and any other
equipment before connecting them.
• Do not touch the pins of the video signal cable plug.
back cover
1
HD-15 AUDIO
IN
DVI-D
AUDIO IN AUDIO IN
HD-15
INPUT 1 INPUT 2 INPUT 3
to the DVI-D input
connector (digital RGB)
to the HD15 input
connector (analog RGB)
audio cord
(supplied)
DVI-D video
signal cable
(digital RGB)
(supplied)
4
power cord (supplied)
3
to AC IN
to power outlet
HD15-HD15 video signal
cable (analog RGB)
(supplied)
2
OK
INPUT
MENU
1
lights in green
Loading ...
Loading ...
Loading ...