Loading ...
Loading ...
Loading ...
17
EN
NOTE
• Do not let the detergent harden. Doing so may
lead to blockages, poor rinse performance or
odour.
• Full load: According to manufacturer’s
recommendation
• Part load: ¾ of the normal amount
• Minimum load: ½ of full load
Adding Detergent
• Detergent for main wash a only ~ J
• Detergent for pre wash b and main wash a ~
d # J
NOTE
• Use the appropriate amount of detergent. Too
much detergent, bleach or softener may cause
an overflow.
• When selecting Pre Wash, divide the dosage
into ⅓ for pre wash and ⅔ for main wash.
Adding Detergent Tablet
Detergent tablet is also available when washing
laundry.
1
Open the door and put detergent tablets into
the drum.
2
Load the laundry into the drum and close the
door.
NOTE
• Do not put tablets into the drawer.
Adding Fabric Softener
• Add a fabric softener to the maximum fill line.
• Close the dispenser drawer gently.
• Do not leave the fabric softener in the detergent
drawer for more than 2 days. Fabric softener
may harden.
• Softener will automatically be added during the
last rinse cycle.
• Do not open the drawer when water is being
supplied.
• Solvents (e.g. benzene, etc.) must not be used.
NOTE
• Pouring excessive fabric softener over the
maximum fill line can cause it to dispense too
early, which may stain clothes.
• Do not pour fabric softener directly onto the
laundry, which may stain the laundry.
Adding Water Softener
A water softener, such as anti-limescale can be
used to cut down on the use of detergent in areas
with high water hardness level.
• First add detergent, and then the water softener.
Dispense according to the amount specified on
the packaging.
Loading ...
Loading ...
Loading ...