Loading ...
Loading ...
Loading ...
BDL8470EU
18
• The PIP function is available only for certain signal source
combinations as shown in the table below.
Main
Sub
DP
OPS
HDMI1
VGA
HDMI2
HDMI3
COMP
VIDEO
USB
BROWSER
SmartCMS
DVI
DP O O O O O O O O O O O O
OPS O O X O O O O O O O O O
HDMI1 O X O O O O O O O O O O
VGA O O O O O O O O O O O O
HDMI2 O O O O O X O O O O O O
HDMI3 O O O O X O O O O O O O
COMP O O O O O O O X X X X O
VIDEO O O O O O O X O X X X O
USB O O O O O O X X O X X O
BROWSER O O O O O O X X X O X O
SmartCMS O O O O O O X X X X O O
DVI O O O O O O O O O O O O
(O: PIP function available, X: PIP function unavailable)
• The availability of the PIP function will also depend on the resolution
of the input signal being used.
5.2.5. Configuration1 menu
P
Audio
PIP
Screen
Picture
Configuration 1
Auto adjust
Power save
Network control port
Network settings
Switch on state
Panel saving
DMR
Configuration1 reset
Factory reset
Clear internet memory
Action
Action
Last status
Action
Off
Cancel
Cancel
RS232
Cancel
Action
Switch on state
Select the display status used for the next time you connect the power
cord.
• {Power off} - The display will remain off when the power cord is
connected to a wall outlet.
• {Forced on} - The display will turn on when the power cord is
connected to a wall outlet.
• {Last status} - The display will return to the previous power status
(on/off/standby) when removing and replacing the power cord.
Auto adjust
Use this function to automatically optimize the display of VGA input
image.
NOTE: This item is functional for VGA input only.
Power save
Use this setting to reduce the power automatically.
• {RGB} - Select {On} to let the display enter power saving mode
when no signal is detected from the PC mode (RGB color space)
inputs after 10 seconds.
• {Video} - Select {On} to enter power saving mode when no signal
is detected from the VIDEO mode (YUV color space) inputs after
10 seconds.
Panel saving
Choose to enable the panel saving functions and thus reduce the risk of
“image persistence” or “ghost-imaging”.
• {Cooling Fan} - Choose to adjust the cooling fan’s speed of
rotation. Select {Auto} to turn on/off the cooling fan according to
the display’s temperature.
Choose from: {Auto} / {Off} / {Low} / {Medium} / {High}.
NOTES:
• The default {Auto} option will start running the cooling fan if
the temperature of 45°C (113°F) is reached, and stop running
the cooling fan if the temperature of 43°C (109°F).
• A temperature-warning message will be shown on the screen if
the temperature reaches 58°C (136°F). All key functions except
[ ] key will then be disabled.
• Once the temperature reaches 60°C (140°F), the display power
will be shut down automatically.
• {Brightness} - Select {On} and the image brightness will be reduced
to an appropriate level. The Brightness setting in the Picture menu
will be unavailable when selected.
• {Pixel shift} - Select the time interval ({Auto} / {10 ~ 900} Seconds
/ {Off}) for the display to slightly expand the image size and shift
the position of pixels in four directions (up, down, left, or right).
Activating Pixel Shift will disable H Position, V Position and Zoom
Mode in the Screen Menu.
Network control port
Select the network control port.
Choose from: {RS232} / {Card OPS RS232} / {LAN ->RS232}.
NOTE: After connected to your OPS device, the option {Card OPS
RS232} is functional.
Network settings
Assign {IP address}, {Subnet Mask}, and {Default gateway} for the
display.
Network settings
Network host name
DHCP
IP address
Subnet mask
Default gateway
Login user name
Login password
P
172
255
0
0
H
-
-
-
0
[ OK ]
change [OK] in STORE
L
Disable
16
255
0
0
-
-
-
0
0
0
0
1
0
0
-
-
-
DNS1
DNS2
MAC address
0 1
0
-
0
-
0 0
-
0
-
0
-
0 0
-
a d
m
ni
0
• Network host name
• DHCP - Choose to enable or disable the DHCP function. If enabled,
the display will be assigned IP address, Subnet mask and Default
gateway automatically. If disabled, you will be prompted to enter the
following values manually. Press [OK] button to store and save the
chosen values.
• IP address
• Subnet mask
• Default gateway
• DNS1
Loading ...
Loading ...
Loading ...