Loading ...
Loading ...
Loading ...
13
Basic Shooting and Playback Operations
3 Frame the picture.
• Move the zoom control or the side zoom control to change the zoom lens position.
• If you lose sight of the subject while shooting with the lens in telephoto position,
press the q (snap-back zoom) button to temporarily widen the visible area so that
you can frame the subject more easily.
4 Press the shutter-release button
halfway.
• To press the shutter-release button “halfway”
means to press and hold the button at the point
where you feel a slight resistance.
• When the subject is in focus, the focus area or
focus indicator is displayed in green.
• When you are using digital zoom, the camera
focuses in the center of the frame and the focus
area is not displayed.
• If the focus area or focus indicator flashes, the
camera is unable to focus. Modify the composition
and try pressing the shutter-release button halfway
again.
5 Without lifting your finger, press the
shutter-release button all the way
down.
B Notes About Saving Images or Movies
The indicator showing the number of exposures remaining or the indicator showing the
remaining recording time flashes while images or movies are being saved. Do not open
the battery-chamber/memory card slot cover or remove the batteries or memory
card while an indicator is flashing. Doing this could result in loss of data, or in damage to the
camera or the memory card.
Zoom out Zoom in
Zoom in
Zoom out
q button
F3
F3
1 / 2 5 0
1/250
Focus area
Loading ...
Loading ...
Loading ...