Loading ...
Loading ...
Loading ...
23
WARNING!
If overflow occurs, turn off the main water supply before calling a
service. If there is water
in the base pan because of an overfill or small leak, the water should
be removed before
restarting the dishwasher.
TROUBLESHOOTING TIPS
When some malfunctions happen, the appliance will display error
codes to warn you.
Codes
Meanings
Possible Causes
Water drainage malfunction
E1
E2
E3
E4
E5
E6
E7
Door open
Water inlet
Water drainage
Temperature sensor
Overflow/leakage
Water leakage
Heating element
The door is opened when the
dishwasher is operating
Water inlet malfunction
Temperature sensor malfunction
Overflow occurs/Water leakage occurs
Water leakage occurs
Abnormal heating
Before Calling for Service
Reviewing the charts on the following pages may make you be free of calling for service.
Problem
Dishwasher
doesn't run
Drain pump
doesn't stop
Possible Causes
What To Do
Fuse blown, or the
circuit breaker acted
Power supply is
not turned on
Water pressure is low
Overflow
The system is designed to detect an overflow. When it does, it shuts off the circulation
pump and turns on the drain pump.
Check that the water supply is connected properly and the water is turned on.
Make sure the dishwasher is turned on and the door is closed securely. Make sure the
power cord is properly plugged into the wall socket.
Replace fuse or reset circuit breaker. Remove any other appliances sharing the same
circuit with the dishwasher.
TROUBLESHOOTING TIPS
Error codes
Loading ...
Loading ...
Loading ...