Loading ...
Loading ...
Loading ...
19
9.Delay button: The START DELAY will allow you to delay the start
time of any cycle automatically up to 24hours.
10、Digital display: To display the running time remain, malfunction
codes and delay time.
WARNING
To avoid risk of injury, always use caution when opening the door
during or following a wash cycle as hot water or steam may escape.
Do not fully open the door until water noises have stopped and steam
has subsided.
Turning on the Appliance
Starting a wash cycle...
Draw out the lower and upper basket, load the dishes and
1. push them back. It is recommended to load the lower basket first,
then the upper one (see the section entitled "Loading the
Dishwasher"). Pour in the detergent (see the section entitled "Salt,
Detergent and Rinse Aid").
You must have:120-volt,60Hz,AC-only,10-or 12-amp,fused electrical
supply.
Make sure that the water supply is turned on to full pressure. Open
the door, press the "Power“ button, Press the "Program" button to
select a desired "Wash cycle". (See the section entitled "Wash Cycle
Table" ) .Press the Start/Pause button and close the door within 4
seconds and the dishwasher will be activated. If the door is not
closed within 4 seconds after pressing the Start/Pause button, the
power is off. In this state, the door is closed and the dishwasher will
not start. Press the Start/Pause button again, the Digital Display
indicator lights up, and the door is closed within 4 seconds. The
dishwasher will be activated.
1.ON/OFF Button: To turn on/off the power supply.
2.Program select button: Press the button to select the washing
program.
3.Program indicator light: when you select a washing program, the
corresponding light will display.
.Salt and rinse aid indicator light: To come on when the softener or
dispenser needs to be refilled.
5.Drying light: To come on when the dishwasher is drying.
6.
7.Sanitize indicator: An increased temperature during the final rinse
stage will improve the drying process; The indicator will be available
when the Sanitize button is selected.
8.Half load button: The Half Load option can only be used with
Pot&Pans\Normal.
NOTE: Buttons are sensitive and should be touched gently. Avoid any
grease or food particles resting on the buttons as they could activate
the dishwasher. Wiping and cleaning can also activate the
dishwasher. For best results, use bare, clean hands when touching
the buttons.
4
Start/pause button: The appliance will start or pause the expected
washing cycle.
1
23
4
6
7
8
9
10
5
OPERATING THE DISHWASHER
Normal
Rinse
Rinse
Aid
Salt
Express
min
On
Off
Program
Start/Pause
Half Loa d
Delay
Sanitize
Dry Heavy
Delicat e
Light
OPERATING THE DISHWASHER
Loading ...
Loading ...
Loading ...