Loading ...
Loading ...
Loading ...
8
Memory
The memory allows you to store the setting for your favourite
meal and call it up at any time.
Two memory locations are available: "
g" and "h".
The memory is useful if you prepare one meal particularly
frequently.
Saving settings in the memory
1. Press the % button.
Your appliance is ready for use.
2. Press the button for the microwave power setting you require.
The power and a suggested cooking time appear in the
display.
3. Set the cooking time using the rotary selector.
4. Press and hold the g or h button for approximately
4 seconds until a signal sounds.
The setting is saved and can be started at any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Starting the memory function
You can start cooking at any time using the settings saved for
your meal.
1. Press the % button.
Your appliance is ready for use.
2. Press the g or h button.
The stored settings are displayed.
3. Press the n button.
The memory function starts. The
r cooking time counts down
in the display.
Note: Once operation has started, you can no longer change
the memory location.
Note: The programmes which have been set remain stored
even if there is a power cut.
The cooking time has elapsed.
An audible signal sounds. The memory function has finished.
Use the
% button to switch off the appliance or make new
settings. You can stop the audible signal by pressing the
0
button.
Pausing
Briefly press the
n button or open the appliance door.
Operation is suspended.
After closing the door, press the
n button. Operation will then
continue.
Changing the basic settings
Your appliance has various basic settings which you can
change at any time.
Basic settings
In the table, you will find all the basic settings and options for
changing them.
Prerequisite: your appliance is switched off.
1. Press and hold the 0 button for a few seconds.
The first basic setting appears in the display.
2. You can change the basic setting by turning the rotary
selector.
3. Confirm by pressing the 0 button.
The next basic setting appears in the display. You can go
through all of the basic settings with the
0 button and make
changes with the rotary selector.
4. To finish, press and hold the 0 button for a few seconds.
All settings are applied.
You can change the settings at any time.
Care and cleaning
With careful care and cleaning your microwave oven will retain
its looks and remain good order. We will explain here how you
should care for and clean your appliance correctly.
Basic setting Options Explanation
™‚
Clock display
‚ = on
Clock display
ƒ = off
Displays the clock
™ƒ
Signal duration
ƒ= medium = 2 minutes
‚ = short = 10 seconds
„ = long = 5 minutes
Audible signal after the cooking time has
elapsed
™„
Button tone
‚ = on
Button tone
ƒ = off
Confirmation tone when a button is pressed
™…
Waiting time
ƒ = medium = 5 seconds
‚ = short = 2 seconds
„ = long = 10 seconds
Waiting time between two separate steps,
after setting
Loading ...
Loading ...
Loading ...