Loading ...
Loading ...
Loading ...
(63,1)
北米Model "A1760BE-A" EDITED: 2020/ 10/ 1
serious injury or death could result.
1. Move the seatback back and forth to
confirm that it is securely locked into place.
– Check that the red colored unlock-
ing marker which is attached to the
bottom of the lock release knob is
invisible. For details, refer to “Folding
down the rear seatback” F1-9.
2. You will find marks “ ” at the bottom of
the rear seat seatbacks. These marks
indicate the positions of the lower an-
chorages (bars).
Remove the covers and locate the lower
anchorages (bars).
If it is hard to install the child restraint
system because the anchorage cover
returns to the original position, press the
anchorage cover to the seat cushion until it
is flat.
3. Remove the rear seat head restraint.
For details, refer to “Head restraint adjust-
ment” F1-8.
4. Store the removed head restraint in the
trunk.
CAUTION
Do not place the head restraint in the
passenger compartment to prevent
it from being thrown around in the
passenger compartment in a sud-
den stop or a sharp turn.
5. While following the instructions sup-
plied by the child restraint system manu-
facturer, connect the lower hooks onto the
lower anchorages located at “
” marks on
the bottom of the rear seatback. When the
hooks are connected, make sure the
adjacent seatbelts are not caught.
– CONTINUED –
Seat, seatbelt and SRS airbags/Child restraint systems
1-33
1
Loading ...
Loading ...
Loading ...