Loading ...
Loading ...
Loading ...
(210,1)
北米Model "A1760BE-A" EDITED: 2020/ 10/ 1
– When an oncoming vehicle or ve-
hicle ahead comes in and out of view
because of continuous curves, median
strips, roadside trees, etc.
. If the stereo camera detects the light of
the front fog lights of an oncoming vehicle,
the headlight mode may change from the
high beam to the low beam automatically.
. The headlight mode may change from
the high beam to the low beam, or the low
beam mode may continue, when affected
by a street light, traffic signal, illumination
of an advertisement board, or a reflective
object such as a road sign and signboard.
. The timing of the change of headlight
mode may differ due to the following
factors.
– The vehicle condition (e.g., the
number of passengers or the weight
of loaded cargo)
– Surrounding situation (e.g., the
movement and direction of an oncom-
ing vehicle or vehicle ahead)
– Detection limitations of the camera
angle
& Headlight flasher
S03AH03
CAUTION
Do not hold the lever in the flashing
position for more than just a few
seconds.
To flash the headlights, pull the lever
toward you and then release it. The high
beam will stay on for as long as you hold
the lever. The headlight flasher works even
though the lighting switch is in the “
” (off)
position.
When the headlights are on high beam, the
high beam indicator light “
” on the
combination meter is also on.
& Daytime running light system
S03AH04
WARNING
When the daytime running lights are
illuminated, the tail lights do not
illuminate. When it becomes dark
outside, turn the light switch to the
“
” position to illuminate the head-
lights and tail lights. This will im-
prove visibility and allow other dri-
vers to see your vehicle more easily.
The daytime running lights will automati-
cally illuminate when the following condi-
tions are fulfilled.
. The engine is running.
. The parking brake is fully released.
. The light control switch is in the “AUTO”
(if equipped), “
” or off position.
. For CVT models, the select lever is in a
position other than the “P” position.
NOTE
When the light switch is in the “ ”
position, the instrument panel illumina-
tion, front side marker lights, tail lights
and license plate lights are also illumi-
nated.
Instruments and controls/Light control switch
3-70
Loading ...
Loading ...
Loading ...