Subaru 2021 WRX WRX STI Limited

User Manual - Page 109

For 2021 WRX WRX STI LIMITED.

PDF File Manual, 488 pages, Read Online | Download pdf file

2021 WRX WRX STI LIMITED photo
Loading ...
Loading ...
Loading ...
(107,1)
北米Model "A1760BE-A" EDITED: 2020/ 10/ 1
from magnetic sources.
Do not leave the access key
fob near a battery charger or
any electrical accessories.
Do not apply metallic window
tint or attach metallic objects
to the windows.
Do not fit non genuine acces-
sories or parts.
NOTE
. After the vehicle battery is dis-
charged or replaced, initialization of
the steering lock system may be re-
quired to start the engine. In this case,
perform the following procedure to
initialize the steering lock.
1) Turn the push-button ignition
switch to the “OFF” position. For de-
tails, refer to “Switching power status”
F3-7.
2) Open and close the drivers door.
3) Wait for approximately 10 seconds.
When the steering is locked, the initi-
alization is completed.
. Do not leave the access key fob in
the following places.
On the instrument panel
On the floor
Inside the glove box
Inside the door trim pocket
On the rear seat
On the rear shelf
Inside the trunk
If you do, the following situations
may occur.
The access key fob is mistakenly
locked inside the vehicle.
A false warning issues although
no malfunction actually occurs.
No warning issues even when
any malfunction occurs.
! Regarding setting
S02AP1104
NOTE
. You can change the operational/non-
operational setting for the keyless
access function. For the setting proce-
dure, refer to “Disabling keyless ac-
cess function” F2-14.
. For detailed information about the
operation method for the push-button
ignition switch while the keyless ac-
cess function is switched to the non-
operational mode, refer to “Access key
fob if access key fob does not operate
properly” F9-18.
! Radio waves used for the keyless
access with push-button start sys-
tem
S02AP1105
The keyless access with push-button start
system uses radio waves of 134 kHz, in
addition to the radio waves used for the
remote keyless entry system. The radio
waves are periodically output from the
antennas installed on the vehicle as shown
in the following illustration.
CONTINUED
Keys and doors/Keyless access with push-button start system
2-9
2
Loading ...
Loading ...
Loading ...