Loading ...
Loading ...
Loading ...
Assembly
Machine Specifications
Total Weight and Size 20000 Eagle Chest Press
Machine Dimensions in UseMachine Dimensions at RestWeight
53” L × 57” W × 71” H45” L × 57” W × 71” H623 Lbs
135 cm L × 145 cm W × 180 cm H114 cm L × 145 cm W × 180 cm H283 Kg
Maximum Training WeightMaximum User Weight
305 lbs/138 kg300 lbs/135 kg
Choosing and Preparing a Site
Before assembling the unit, verify the chosen site meets the following criteria:
Area is well lit and well ventilated.
Surface is structurally sound and properly leveled.
Free area for access to unit and emergency dismount. Minimum clearance is 23.6 inches (0.6 meters).
Adjacent units may share the free area.
It is the responsibility of the facility owner/owner of the equipment to ensure that there is appropriate clearance
around each machine to allow for safe use and passage.
In compliance with the ADA (American Disabilities Act) there must be clear floor space of at least 30 by 48 inches
and be served by an accessible route for at least one of each type of exercise equipment. If the clear space is
enclosed on three sides (e.g., by walls or the equipment itself), the clear space must be 36 by 48 inches.
All other machines must have a clear floor space of 23” for all access point on the machine, unless shown in the
Owner’s Manual.
Environment
Humidity and Static Electricity
The unit is designed to function normally in an environment with a relative humidity range of 30% to 75%. The
unit can be shipped and stored in a relative humidity range of 10% to 90%.
Climatic dry air may cause static electricity. During workout, user may experience a shock due to build up of static
electricity on the body and the discharge path of the unit. If static electricity is experienced, increase humidity to
a comfortable level through the use of a humidifier.
Do not install, use or store the unit in an area of high humidity, such as in the vicinity of a steam room, sauna,
indoor pool or outdoors. Exposure to extensive water vapor, chlorine and/or bromine could adversely affect other
parts of the unit.
Page 8 of 24
Loading ...
Loading ...
Loading ...