Loading ...
Loading ...
Loading ...
HARD-
WIRE INSTALLATION
Turn off the appliance completely and let cool before servicing. Only a q
person should service and repair this electric appliance.
If it is necessary to hard-
wire this appliance, a qualified electrician must remove the
cord connection, and wire the appliance directly to the house hold wiring.
This appliance m
ust be electrically connected and grounded in accordance with local codes,
if hard-
wired. In the absence of local codes, use the current CSA C22.1 CANADIAN
ELECTRICAL CODE in Canada or the current ANSI/NFPA 70 NATIONAL ELECTRICAL
CODE in the United States.
1.
Remove the cover plate from the left side of the appliance by removing the two screws,
as shown below. Unscrew and remove power cord.
2.
Attach the wiring to the junction block. Please make sure the live wire goes into the “L”, the
neutral
wire into “N” and the ground wire into “G”.
3.
Return the cover plate to the left side and screw the two screws back in to fasten the plate.
25
WIRE INSTALLATION
Turn off the appliance completely and let cool before servicing. Only a q
person should service and repair this electric appl
iance.
wire this appliance, a qualified electrician must remove the
cord connection, and wire the appliance directly to the house hold wiring.
ust be electrically connected and grounded in accordance with local codes,
wired. In the absence of local codes, use the current CSA C22.1 CANADIAN
ELECTRICAL CODE in Canada or the current ANSI/NFPA 70 NATIONAL ELECTRICAL
Remove the cover plate from the left side of the appliance by removing the two screws,
as shown below. Unscrew and remove power cord.
Attach the wiring to the junction block. Please make sure the live wire goes into the “L”, the
wire into “N” and the ground wire into “G”.
Return the cover plate to the left side and screw the two screws back in to fasten the plate.
Turn off the appliance completely and let cool before servicing. Only a q
ualified service
wire this appliance, a qualified electrician must r
emove the
cord connection, and wire the appliance directly to the house hold wiring.
ust be electrically connected and grounded in accordance with local codes,
wired. In the absence of local codes, use the current CSA C22.1 CANADIAN
ELECTRICAL CODE in Canada or the current ANSI/NFPA 70 NATIONAL ELECTRICAL
Remove the cover plate from the left side of the appliance by removing the two screws,
Attach the wiring to the junction block. Please make sure the live wire goes into the “L”, the
Return the cover plate to the left side and screw the two screws back in to fasten the plate.
Loading ...
Loading ...
Loading ...