Loading ...
Loading ...
Loading ...
INSTALLATION- BUILT-
IN
NOTE
: Due to the many different materials used to build walls, it is highly recommended that
you consult your local builder before you install this appliance on a wall.
Preparation
1.
Select a location that is not prone to moisture and is located at least 0.91m
from combustible materials such as curtains, drapes, furniture, bedding, paper, etc.
2.
Mark the desired location on the floor and store the appliance in a safe, dry and dust free
place.
3.
Prepare a wall with a framed opening to accommodate the s
least 1/4” (6mm) around the edge of the appliance. Any new wiring must be done in
compliance with local and national codes and other applicable regulations.
Prior to installing, test the appliance to make sure the appliance is fu
plugging the power supply cord into a 120 Volt grounded outlet.
The rough wall opening size of the fireplace:
W(“)
SYM-34 32 7/8
SYM-42 42 3/4
SYM-50 50 3/4
SYM-60 60 3/4
SYM-74 74 3/4
SYM-88 88 3/4
SYM-100 100 3/4
INSTALLATION
1. Unscrew 4 screws
and take off the trim. (NOTE: Keep hold of the front glass as it may fall
down automatically when the trim is removed.)
2.
When the trim is removed, tak
17
IN
: Due to the many different materials used to build walls, it is highly recommended that
you consult your local builder before you install t
his appliance on a wall.
Select a location that is not prone to moisture and is located at least 0.91m
from combustible materials such as curtains, drapes, furniture, bedding, paper, etc.
Mark the desired location on the floor and store the appliance in a safe, dry and dust free
Prepare a wall with a framed opening to accommodate
the s
ize of your unit. Leave at
least 1/4” (6mm) around the edge of the appliance. Any new wiring must be done in
compliance with local and national codes and other applicable regulations.
Prior to installing, test the appliance to make sur
e the appliance is fu
lly operational by
plugging the power supply cord into a 120 Volt grou
nded outlet.
The rough wall opening size of the fireplace:
D(“)
H(“)
6 16
6 16
6 16
6 16
6 16
6 16
6 16
and take off the trim. (NOTE: Keep hold of the front glass as it may fall
down automatically when the trim is removed.)
ed, take off the front glass panel.
: Due to the many different materials used to build walls, it is highly recommended that
you consult your local builder before you install this appliance on a wall.
Select a location that is not prone to moisture and is located at least 0.91m
or 3 feet away
from combustible materials such as curtains, drapes, furniture, bedding, paper, etc.
Mark the desired location on the floor and store the appliance in a safe, dry and dust free
ize of your unit. Leave at
least 1/4” (6mm) around the edge of the appliance. Any new wiring must be done in
compliance with local and national codes and other applicable regulations.
lly operational by
and take off the trim. (NOTE: Keep hold of the fron
t glass as it may fall
Loading ...
Loading ...
Loading ...