Loading ...
Loading ...
Loading ...
5
1 2 3 4 5 6 7 8 9 10
11 12 13
14
15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
Knife Blade
Follow the instructions under ‘to use your food
processor’.
Hints and Tips
l
For coarser textures use the pulse control.
l
Cut food such as meat, bread, vegetables into
cubes approximately 2cm.
l
Biscuits should be broken into pieces and added
down the feed tube whilst the appliance is
running.
l
Take care not to over-process.
l
When making pastry use fat straight from the
fridge cut into 2cm cubes.
1 2 3 4 5 6 7 8 9 10
11 12 13 14
15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
Dough Tool
Use for yeasted dough mixes.
Hints and Tips
l
Do not process for longer than 60 seconds.
l
Place the dry ingredients in the bowl and add the
liquid down the feed tube whilst the appliance
is running. Process until a smooth elastic ball of
dough is formed.
l
Re-knead by hand only. Re-kneading in the bowl
is not recommended as it may cause the processor
to become unstable.
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15
16
17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
Emulsifying Tool
Follow the instructions under ‘to use your food
processor’.
Use for light mixtures only e.g. cream, mayonnaise.
Hints and Tips
l
Ensure the bowl and tool are clean and free from
grease before use.
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16
17
18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
–
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18
19
20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
Discs
To Use The Cutting Discs
1 Fit the drive shaft and bowl onto the power unit.
2 Holding by the centre grip, place the disc onto the
drive shaft with the appropriate side uppermost.
3 Fit the lid.
4 Put the food in the feed tube.
5 Switch on and push down evenly with the pusher -
never put your fingers in the feed tube.
Hints and Tips
l
Use fresh ingredients
l
Do not cut food too small. Fill the width of the feed
tube fairly full.This prevents the food from slipping
sideways during processing.
l
When slicing or grating: food placed upright comes
out shorter than food placed horizontally.
l
There will always be a small amount of waste on
the disc or in the bowl after processing.
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19
20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
Mini chopper/mill (if supplied)
a Jar
b Sealing ring
c Blade assembly
1
Put the ingredients into the jar.
2
Fit the sealing ring into the blade assembly.
3
Turn the blade assembly upside down. Lower it
into the jar, blades down.
4
Screw the blade assembly onto the jar until finger
tight. Refer to the graphics on the underside of the
blade assembly as follows:
- Unlocked position
- Locked position
5
Place the mill onto the power unit, align the
on the mill with the on the power unit and turn
clockwise
to lock
.
6
Select Maximum speed or use the pulse (P).
Hints and Tips
l
Baby food/purée - allow cooked food to cool down
to room temperature before processing in the mill.
l
For best results the main bowl is recommended
when chopping herbs.
Care and Cleaning
l
Always switch off and unplug before cleaning.
l
Handle the blender/mill blade assembly, knife
blade and discs with care - they are extremely
sharp.
l
Some foods may discolour the plastic. This is
perfectly normal and will not harm the plastic
or affect the flavour of your food. Rub with a
cloth dipped in vegetable oil to remove the
discolouration.
Power Unit
l
Wipe with a damp cloth, then dry. Ensure
that the
interlock area is clear of food debris.
l
Do not immerse the power unit in water.
l
Store excess cord in the storage area at the back
of the power unit
bl
.
Refer to illustration
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
for cleaning
instruction of the tools and attachments
5722000053 Iss 1 Braun FP3131_FP3132 Multilingual.B5.indd 5 27/11/2019 08:05
Loading ...
Loading ...
Loading ...