Loading ...
Loading ...
Loading ...
5
NOTE
The direction in which
your refrigerator doors
open (door swing) can be
reversed, from left to right
or right to left, by moving
the door hinges from one
side to the other. Reversing
the door swing should be
performedbyaqualied
person.
DOOR REMOVAL INSTRUCTIONS
Door removal and reversal instructions:
1. Remove toe grille.
2. Remove top hinge cover. Trace around the hinge with a
soft lead pencil. This makes reinstallation easier. Remove
top hinge and lift door off center hinge pin. Set door aside.
3. Unscrew center hinge pin using adjustable wrench and
save for reassembly. Ensure plastic washer stays on
hinge pin.
4. Lift refrigerator door off of bottom hinge and set aside.
5. Remove center hinge and shim by removing inside
screw and loosening two outside screws enough to
allow hinge and shim to slide out. Tighten screws.
6. Loosen two outside screws on opposite side of
refrigerator, remove inside screw and install center hinge.
7. Removetwoscrewsonbottomhingewith⅜”socketwrench.
8. Install bottom hinge on opposite side with the two
screws removed from step 7.
9. Unscrew bottom hinge pin using adjustable wrench.
Move hinge pin to other hole in hinge and tighten with
adjustable wrench.
10. Reverse door handles (see instruction on next page).
11. Move freezer and refrigerator door stops to opposite side.
Before starting screws, use an awl to puncture the foam.
12. Position refrigerator door onto bottom hinge pin and
screw center hinge pin through center hinge into top of
door. Close refrigerator door to help align hinge hole.
13. Tighten center hinge pin with adjustable wrench.
14. Remove cabinet and hinge hole plugs and move to
opposite side.
15. Lower freezer door onto center hinge pin.
16. Close freezer door. Have an assistant lift up on opposite
side of door while tightening screws to install top hinge.
17. Flip toe grille and reinstall.
18. Plug in electrical power cord and turn refrigerator temperature
control to center position. Adjust setting as necessary.
IMPORTANT
Before you begin, turn the
refrigerator temperature
control to “0” (Mechanical
controls) or “OFF” (Electronic
controls) and remove the
electrical power cord from
the wall outlet. Remove any
food from door shelves.
Door
Stop
Shim
Washer
Hinge
Pin
Center
Hinge
Screws
Hinge
Hole
Plug
Handle
Hole
Plug
Door
Stop
Screw
Washer
Hinge
Pin
Bottom
Hinge
Screws
Toe
Grille
Door Stop
Screw
Door
Stop
Top
Hinge
Cover
Top
Hinge
Top Hinge
Cover Front
Screw
Top Hinge
Cover Rear
Screw
Bottom
Hinge
Screw
Top
Hinge
Screw
Adjustable
Wrench
Socket
Wrench Set
3/8" Fixed
Wrench
Tools Necessary:
Phillips
TM
Head
oror
Loading ...
Loading ...
Loading ...