Loading ...
Loading ...
Loading ...
10
IMPORTANT
Turning the refrigerator/freezer temperature
control to “0” turns off the compressor and
prevents the refrigerator from cooling, but
does not disconnect the power to the light
bulb and other electrical components. To turn
off power to your refrigerator, you must unplug
the power cord from the wall outlet.
NOTE
Whenrstturningrefrigeratoron,move
control(s) to Normal. This is the recommended
initial setting. After 24 hours, adjust the
controls as needed.
IMPORTANT
Your ice maker is shipped from the factory
with the wire signal arm in the ON position. To
ensure proper function for your ice maker, hook
up water supply immediately or turn ice maker
OFF by lifting the wire signal arm until it clicks
and locks in the UP position. If the ice maker is
on and the water supply is not connected, the
water valve will make a loud chattering noise.
Auxiliary Freezer Control
Normal
ColderCold
Refrigerator/Freezer Control
Normal
Cold Colder
Allow 24 hrs for adjustments
Temperature Adjustment
• Adjust temperature gradually: move the
knob in small increments, allowing the
temperature to stabilize.
Turning the refrigerator/freezer control will
change temperatures in both compartments.
The auxiliary freezer control has no effect on
electrical power to the refrigerator.
To maintain temperatures, a fan circulates air in
the refrigerator and freezer compartments. For
good circulation, do not block cold air vents with
food items.
MECHANICAL CONTROLS
ICE SERVICE
If your refrigerator has an automatic ice maker,
minimalicewillbeproducedduringtherst24
hours of operation. Air in new plumbing lines
may cause the ice maker to cycle two or three
times before making a full tray of ice. With no
usage, it will take approximately one to two
daystolltheicecontainer.
Newplumbingconnectionsmaycausetherst
production of ice cubes to be discolored or
haveanoddavor.Discardicemadeduring
therst24hours.
Turning your Ice Maker On
After the plumbing connections have been
completed, the water supply valve must be
opened. Place the ice container under the
ice maker, pushing it as far back as possible.
Lower the wire signal arm to its “down” or ON
position.
Turning your Ice Maker Off
To stop the ice maker, lift the wire signal
arm until it clicks and locks in the “up” or
OFF position. The ice maker also turns off
automatically when the ice container is full.
NOTE
Automatic ice makers are also optional
accessories that may be installed in most models
at any time. Call your local dealer for information.
Wire
Signal Arm
ON
OFF
Cool Down Period
To ensure safe food storage, allow the
refrigerator to operate with the doors closed
for at least 8 hours before loading it with food.
Refrigerator & Freezer Controls
(some models)
Loading ...
Loading ...
Loading ...