Loading ...
Loading ...
Loading ...
4
NOTE
If your refrigerator is placed with the door
hinge side against a wall, you may have to
allow additional space so the door can be
opened wider.
NOTE
Raise the front of the refrigerator enough so
the doors close freely when opened halfway.
The refrigerator should slope ¼” to ½” from
front to back. Then level the refrigerator
from side-to-side.
INSTALLATION
CAUTION
Do Not install the refrigerator where the
temperature will drop below 55°F (13°C) or
rise above 110°F (43°C). The compressor
will not be able to maintain proper
temperatures inside the refrigerator.
Do Not block the toe grille on the lower front
ofyourrefrigerator.Sufcientaircirculation
is essential for the proper operation of your
refrigerator.
This Use & Care Guide provides general
operating instructions for your model. Use the
refrigerator only as instructed in this Use &
Care Guide. Before starting the refrigerator,
followtheseimportantrststeps.
Location
• Choose a place that is near a grounded
electrical outlet. Do Not use an extension
cord or an adapter plug.
• If possible, place the refrigerator out of
direct sunlight and away from the range,
dishwasher or other heat sources.
• Therefrigeratormustbeinstalledonaoor
that is level and strong enough to support
a fully loaded refrigerator.
• Consider water supply availability for
modelsequippedwithanautomaticice
maker. If you do not hook up water to
the refrigerator, remember to turn the ice
maker off.
Installation
Installation clearances
• Allow the following clearances for ease
of installation, proper air circulation, and
plumbing and electrical connections:
Sides&Top ⅜inch
Back 1 inch
Leveling
All four corners of your refrigerator must rest
rmlyonasolidoor.Yourrefrigeratoris
equippedwithadjustablefrontrollersorfront
leveling screws to help level your unit.
Raise
Adjustable Front Roller (some models)
Raise
Stationary Front Roller with
Leveling Screw (some models)
To level your
refrigerator:
1. Remove
toe grille.
2. Useat-
blade
screwdriver
or⅜”
socket
wrench to adjust front rollers. Use
adjustable wrench to adjust leveling
screws.
Loading ...
Loading ...
Loading ...