Loading ...
Loading ...
Loading ...
Shelf supports en
27
4.
Remove the pull-out rail.
5.
Clean the pull-out rail.
→"Cleaning products", Page22
18.4 Attaching the pull-out rail
Note:The pull-out rails only fit on the right or left. Make
sure when you fit them that you can pull them out to-
wards the front.
1.
Insert the pull-out rail between the two bars.
2.
Push the retainer in between the lower and the
upper bar.
3.
Keep the PUSH tab pushed in and swing the pull-
out rail inwards until the front retainer is located
between the two bars .
‒ Release the PUSH tab.
a The retainer clicks into place.
4.
Pull the pull-out rail out as far as it will go and slide
it back in.
18.5 Detaching the rails in the top cooking
compartment
WARNING‒Risk of burns!
The shelf supports get very hot
▶
Never touch the shelf supports when hot.
▶
Always allow the appliance to cool down.
▶
Keep children at a safe distance.
1.
Lift the rail forwards slightly and detach it .
2.
Pull the rail to the front and remove it .
18.6 Attaching the rails in the top cooking
compartment
Notes
¡ The rails only fit on the right or left.
Loading ...
Loading ...
Loading ...