Loading ...
Loading ...
Loading ...
Sabbath mode en
19
12.1 Setting rapid heating for the main oven
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note:Do not set a cooking time until rapid heating has
come to an end.
1.
Set a suitable type of heating and a temperature of
at least 100°C.
2.
Press the button.
a appears in the display.
a Rapid heating starts after a few seconds.
a Once rapid heating has ended, an audible signal
sounds and the symbol goes out in the display.
3.
Place the food in the cooking compartment.
13 Sabbath mode
You can use the Sabbath mode to set a cooking time
of over 70hours for the main oven . You can use
Top/bottom heating to keep food warm between
85°C and 140°C during this time without having to
switch the appliance on or off.
13.1 Starting Sabbath mode
Notes
¡ If you open the appliance door during operation, the
appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again.
¡ Once it has started, you can no longer change or in-
terrupt Sabbath mode.
¡ You cannot delay the end time for Sabbath mode.
Requirements
¡ Sabbath mode is activated in the basic settings.
→"Basic settings", Page19
¡ It is not possible to set operation with a cooking time
or end time in the top oven .
¡ It is not possible to set operation with a cleaning
function in the top oven .
1.
Use the function selector for the bottom oven to
set the programmes .
a appears in the display.
2.
Use the temperature selector to set the temperature.
3.
Press the button repeatedly until is highlighted
on the display.
4.
Use the or button to set the time.
a After a few seconds, the appliance starts heating
and the cooking time counts down.
5.
Once the time has elapsed, the display shows the
time as zero. The appliance stops heating up and
responds again as usual outside of Sabbath mode.
‒ Switch off the appliance.
The appliance automatically switches off after ap-
prox.10to 20 minutes.
14 Basic settings
You can configure the appliance to meet your needs.
14.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display Basic setting Selection
Signal duration upon completion of a time or
timer period
= 10 seconds
= 30 seconds
1
= 2 minutes
Waiting time until a setting is applied = 3 seconds
1
= 6 seconds
= 10 seconds
Button tone when pressing a button = off
= on
1
Brightness of the display illumination = dark
= medium
1
= bright
Time display = hide the time
= display the time
1
1
Factory setting (may vary according to model)
2
Depending on the appliance specifications
3
Bottom oven
Loading ...
Loading ...
Loading ...