Loading ...
Loading ...
Loading ...
26
BURNER USE
Manual lighting
If there has been a power outage, the burners can be manually lit. If the flame is blown
out during a power failure, turn the dial immediately to
OFF as the burner will not relight
and gas may escape.
1
Carefully hold a battery operated lighter
near the desired burner.
When the burner is lit, turn the dial to any
setting between
HI (high) and SIM (simmer).
When you have finished cooking, turn the
dial clockwise back to
OFF.
If you are using LP gas, there may be
a slight extinction pop or flash at the flame
spreader a few seconds after the burner has
been turned off. This is normal.
2
3
4
Push the dial in and turn counterclockwise
to LITE. Hold the dial at LITE before turning
to a flame setting.
Loading ...
Loading ...
Loading ...