Loading ...
Loading ...
Loading ...
Appliance door en
19
7. Lift out each panel (fig. %) and set them down
carefully on a flat surface.
Clean the panels with glass cleaner and a soft cloth.
:Warning
Risk of injury!
■ Scratched glass in the appliance door may develop
into a crack. Do not use a glass scraper, sharp or
abrasive cleaning aids or detergents.
Risk of injury!
■ The hinges on the appliance door move when
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Risk of injury!
■ Components inside the appliance door may have
sharp edges. Wear protective gloves.
Fitting panels
1. Slide each panel back in and make sure that it is
sitting correctly at the bottom in the retainer (fig. !).
2. Push each panel in at the top (fig. ").
3. Put the cover back in place and press on it until you
hear it click into place (fig. #).
4. When fitting the appliance door, ensure that both
hinges are inserted straight into the opening (fig. $).
Place both hinges at the bottom on the panel and
use this as a guide.
Ensure that the hinges are inserted into the correct
opening. You must be able to insert them easily and
without resistance. If you can feel any resistance,
check that the hinges are inserted into the correct
opening.
5. Open the appliance door fully.
6. Close the two locking levers on the left and right
(fig. %).
7. Close the appliance door.
Caution!
Do not use the cooking compartment again until the
panels have been correctly fitted.
1
2
Loading ...
Loading ...
Loading ...