Loading ...
Loading ...
Loading ...
Problem Possible cause Solution
The appliance
does not function
and the standby
light on the cover
of the appliance
ashes.
The dust bucket and/or
the lter cylinder unit are
not installed properly.
Unplug the appliance. Make sure that the lter
cylinder is assembled properly into the lter cylinder
case (‘click’). Also make sure that the lter cylinder unit
is inserted properly into the dust bucket (‘click’).
The cover is not closed
properly.
Make sure the cover is closed properly. Put the plug in
the wall socket and try again.
When I use my
vacuum cleaner
I sometimes feel
electric shocks.
Your vacuum cleaner has
built up static electricity.
The lower the air
humidity in the rooms,
the more static electricity
the appliance builds up.
To reduce this inconvenience, we advise you to
discharge the appliance by frequently holding the tube
against other metal objects in the room (for example
legs of a table or chair, radiator etc.).
To reduce this inconvenience, we advise you to raise
the air humidity level in the room by placing water in
the room. For example, you can hang containers lled
with water from your radiators or place bowls lled
with water on or near your radiators.
If you do not nd the PostureProtect handgrip comfortable to use, you can
consider removing it.
1 Remove the screw cover strip from the PostureProtect handgrip.
2 Use a Torx T15 screwdriver to remove the screws of the
PostureProtect handgrip.
3 Remove the PostureProtect handgrip from the tube.
21
Loading ...
Loading ...
Loading ...