Loading ...
Loading ...
Loading ...
-4-
Reconnect the wires to the slots on the base.
Tips:
1. Use the picture of the wires on your old controller to help you remember.
2. The slot named "M" is for the master valve. In some controllers it is named
as "PMV" or "P/MV" .
3. If the old controller has only one common wire, you can connect it to either
one of the "C" slots and the other "C" slot will sit empty.
4. If you want to use your old power adaptor which has a ground wire, you can
leave the ground wire open.
Wiring
4
POWER ADAPTER
COMMON WIRE MASTER VALVE COMMON WIRE
TO ZONES
If you are not sure about the wiring, please send the picture of
the wiring in the old controller to [email protected].
Our customer service will provide quick support.
Loading ...
Loading ...
Loading ...