Loading ...
01
General Safety Information
Battery Safety Information
Charger Location and Installation Information
Important Safety Instructions
Please save these instructions.
This manual contains important safety, installation, and operating instructions for the
charge controller. The following symbols are used throughout the manual to indicate
potentially dangerous conditions or important safety information.
Remove all sources of power, photovoltaic and battery before servicing or installing.
Make sure connections going into and from the controller are tight and secure.
WARNING - EXPLOSION HAZARD
NEVER charge a frozen battery
Working in the vicinity of lead-acid batteries is dangerous. Batteries produce explosive
gasses during normal battery operation.
To reduce risk of battery explosion, follow these instructions and those published by battery
manufacturer and manufacturer of any equipment you intend to use in vicinity of battery.
Refer installation and servicing to qualified service personnel. High voltage is present inside
unit. Incorrect installation or use may result in risk of electric shock or fire. No user
serviceable parts in this unit.
Do not short the battery; do not let the positive and negative terminals of the battery contact
each other.
The controller employs components that tend to produce arcs or sparks. NEVER install in
battery compartment or in the presence of explosive gases.
Overcharging and excessive gas precipitation may damage battery plates and activate
material shedding on them. Please review battery charging specifications before
connecting your battery.
Do NOT allow water to enter the charge controller, irreversible damage may occur.
Protect all wiring from physical damage, vibration, and excessive heat.
Ensure all terminating connections are clean and tight to prevent arcing and overheating.
Do NOT expose the controller to rain or snow
NOTE
CAUTION
WARNING
Indicates a potentially dangerous condition. Use extreme caution when
performing this task
Indicates a critical procedure for safe and proper operation of the controller
Indicates a procedure or function that is important to the safe and proper
operation of the controller
Loading ...
Loading ...
Loading ...