Loading ...
Loading ...
Loading ...
18
AGM (Green) is the default battery type for the Rover Boost. To change or set the battery type,
long press the SET button for approximately 8 seconds. The Type Indicator will flash a color
depending on the battery type indicated below. Tap the SET button to change between battery
types until the appropriate TYPE color is flashing. To set the battery type, long press the SET
button again and the battery type will be set. Alternatively, you may leave the battery type
flashing and after 15 seconds of inactivity, the battery type flashing will be set as the battery type.
The Rover Boost LED indicators work to provide battery type information, battery status
information, and solar charging information.
Set the Battery Type
LED Indicators
NOTE
When a non-lithium battery is connected for the first time, and the battery voltage
is detected to be greater than 42V, the TYPE LED will flash, short press the button
to enter 48V, long press to enter 36V.
By Default, User mode will operate as a 48V Lithium-iron Phosphate (LFP) – 16
Strings battery charging profile. User mode can be customized via software app
development utilizing the BT-2 Bluetooth Module (RCM-BT2) and Renogy DC
Home App.
TYPE LED
Yellow Gel
AGMGreen
FloodedRed
36V Lithium-iron Phosphate (LFP) – 12 StringsBlue
48V Lithium-iron Phosphate (LFP) – 15 StringsPurple
User (48V Lithium-iron Phosphate (LFP) – 16 Strings）White
Color Battery Type
PV LED
Green
Always on
Color Behavior Charge State
PV LED Indicator
Bright, always on
MPPT
Bulk Charging
PV is not charging
or not detected
Green
Slow Flashing
ON 1 second, OFF 1 second, cycle is 2 seconds
Boost Stage
Green
Single Flash
ON 0.1 second, OFF 1.9 seconds, cycle is 2 seconds
Float Stage
Green
Quick Flashing
ON 0.1 second, OFF 0.1 second, cycle is 0.2 seconds
Equalization Charge
Green
---
Double Flashing
OFF
ON 0.1 seconds, OFF 0.1 second, ON 0.1 seconds
OFF 1.7 seconds
Lithium Activation
or Power Limiting
Loading ...
Loading ...
Loading ...