Loading ...
Loading ...
Loading ...
9
Always check that the coee quantity in the lter is correct (see
paragraph "6.8 Adjusting the quantity of ground coee in the
lter").
• LONG BLACK
This long coee is a favourite in Australia and New Zealand.
Hot water is delivered rst, followed by the espresso directly
into the cup. Only one cup can be made at a time.
Coee Pre-
infusion
Quantity Filter
✓
1 cup
120 ml
C3
C2
✗
RECOMMENDED
1 cup
240 ml
C3
C2
✓
Always check that the coee quantity in the lter is correct (see
paragraph "6.8 Adjusting the quantity of ground coee in the
lter").
6.3 Beverage selection
1. Turn the mode selector dial (B8) to select the desired coee
(see section "6.2 Coee beverages").
2. If you use the 2 cup lter (C3), press the "2X" button (B3) .
6.4 Select the grinding level
The grinding level aects delivery speed and therefore the qual-
ity of the extract.
The rst time you use the appliance, we recommend using the
factory setting (medium grinding) (g. 19), then if you are not
satised with the result, adjust the level according to your per-
sonal taste and the type of coee by setting a ner or coarser
grinding level, referring to the tips in section "6.8 Adjusting the
quantity of ground coee in the lter".
Important:
• Always adjust the coee mill while in operation.
• Adjust one grinding level at a time and make at least 5 coees
before adjusting again.
6.5 The coee lters
The appliance is provided with two coee lters.
The 1 coee lter (C2), has the symbol marked on the
bottom.
The 2 coee lter (C3), has the
symbol marked on the
bottom.
The ideal level of pressed coee is marked inside both lters
(g. 20). If the quantity is above or below the level indicated,
the result may not be satisfactory. The next times you use the
coee mill, you can adjust the grinding level using the dial (B2)
(see section "6.8 Adjusting the quantity of ground coee in the
lter").
6.6 Grind the coee directly into the lter
1. Place the ground coee lter (C2) or (C3) in the lter holder
(C1) (g. 21);
2. Press the "X2" button if you are using the 2 coee lter;
3. Attach the lter holder to the outlet of the coee mill
(A22), aligning it with "INSERT", then turning it to the right
(g. 22). Grinding begins when the lter holder reaches the
CLOSE position and stops automatically;
Important: while the appliance is grinding coee, you can per-
form a rinse, or produce hot water or steam at the same time.
4. Once grinding is complete, the (B16) light ashes: pull
the presser lever (A23) as far as it will go. The force exerted
on the coee is indicated on the lever itself ( )
(g. 23). The
light remains on steady.
5. Remove the lter holder by turning it towards the left.
Important: to adjust the correct quantity ground automatically into the lter hold-
er, see section "6.8 Adjusting the quantity of ground coee in the lter".
If the lter holder is removed without pressing the coee, ash-
es the (B16) light. To press it, turn the knob (B2) to
position to disable the grinding and pull the lever (A23) : then
re-attach the lter holder.
6.7 Using pre-ground coee
1. Place the ground coee lter (C2) or (C3) in the lter holder
(C1) (g. 21);
2. Place the quantity of ground coee in the lter;
3. Turn the dial (B2) to position to disable the coee mill;
4. Attach the lter holder to the outlet of the coee mill (A22)
aligning it with "INSERT", then turning it to the right (g.
10).
5. Pull the presser lever (A23) as far as it will go. The print-
ing on the lever indicates the pressing force exerted
( ) (g. 23).
6. Remove the lter holder by turning it towards the left.
6.8 Adjusting the quantity of ground coee in
the lter
Important: When using the coee mill for the rst time, leave
the knob to
position (min). At the beginning, it is normal for a
few attempts to be needed before nding the correct grinding level
and quantity. We recommend starting by using the default values,
then if necessary changing them according to the tips in section
"14. How to make perfect coee".
A mark on the inside of the (C2) and (C3) lters shows the ideal
quantity of pressed coee (g. 20). Adjust the (B2) dial to in-
crease of decrease the quantity of ground coee (g. 24), in
order to achieve the ideal quantity indicated by the mark.
Loading ...
Loading ...
Loading ...