Loading ...
Loading ...
Loading ...
11
3433
For thoroughly cleaning, use De'Longhi cleaner.
9. CUSTOMISING THE QUANTITY OF COFFEE
BEVERAGES WITH THE
BUTTON B7
1. Prepare the appliance to deliver 1 or 2 cups of the coee
beverage you want to make, as far as attaching the lter
holder (C1) complete with the (C2) or (C3) lter and ground
coee.
2. Select the coee beverage to program, by turning the (B8)
dial.
3. Press the
button: the light corresponding to "OK" but-
ton (B5) comes on steadily and the light corresponding to
the
button ashes.
4. Press the "OK" button to start delivering the beverage. The
lights corresponding to the "OK" and
buttons ash.
5. When you have reached the desired quantity of the bever-
age, press the "OK" button again.
6. Press the button to save the new setting. The appliance
is ready for use again and the
button remains on.
If you do not want to save the new setting, press any other
button.
Programming Long Black coee: follow the procedure described
above for the quantities of both coee and hot water.
Please note:
The coee beverages can be programmed: you can not program steam and hot
water quantity.
"X2" drinks can be programmed separately.
9.1 Beverage reset
To reset the default beverage quantities, press and hold the
button (B7) until it goes o.
The selected beverage is reset to the default values.
10. DELIVERING HOT WATER
1. Choose the cup and place it on the correct cup grille ((A10)
or (A11));
2. Press the button (B6): the appliance delivers hot
water from the spout (A5) then goes o automatically.
3. To stop delivery, press again the button.
You should not deliver hot water for more
than 60 seconds.
11. CLEANING
11.1 Cleaning the machine
The following parts of the machine must be cleaned regularly:
- drip tray (A13) complete with cup grille (A11) and drip tray
grille (A12);
- espresso cup grille (A10);
- coee lters (C2) and (C3);
- beans container (A2);
- coee burrs;
- coee mill outlet (A22) (smart tamping station);
- boiler outlet (A21);
- water tank (A17);
- cappuccino maker (A8) as described in section "8. Cleaning
the cappuccino maker after use".
Important!
Do not use solvents, abrasive detergents or alcohol to clean
the coee machine.
Do not use metal objects to remove encrustations or coee
deposits as they could scratch metal or plastic surfaces.
None of the components of the appliance can be washed in
a dishwasher with the exception of the drip tray (A13) and
cup grilles (A10) and (A11).
If the appliance is not used for more than a week, before
using it again, we recommend you perform a rinse cycle as
described in section "3. Setting up the appliance".
Danger!
While cleaning, never immerse the coee maker in water. It
is an electrical appliance.
Before cleaning the outside of the appliance, turn it o,
unplug from the mains socket and allow to cool.
11.2 Cleaning the drip tray
The drip tray is tted with a level
indicator (A14) showing the
amount of water it contains. Be
-
fore the indicator protrudes from
the cup tray, the drip tray must
be emptied and cleaned, other
-
wise the water may overow the
edge and damage the appliance,
the surface it rests on or the sur-
rounding area.
35
Loading ...
Loading ...
Loading ...