Loading ...
Loading ...
Loading ...
23
Using your steam generator
• Completely unwind the power cord and the steam cord from its storage space– fig.23.
• Lower the retaining hoop (depending on model) to unlock the safety catch – fig.3.
• Plug in your steam generator to an earthed socket.
• Press on the on / off switch. The green light (located on the control panel) flashes and the
boiler heats up –
fig.14.
When the green “steam ready” light stops flashing (after 2 minutes approximately), the
appliance is ready.
The first time the
appliance is used, there
may be some fumes and
smell but this is
not harmful. They will not
affect use and will
disappear rapidly.
Description
1. Steam control button
2. Iron temperature control slide
3. Iron thermostat light
4. Ultracord system (depending on model)
5. Iron rest
6. Illuminated on / off switch
7. Electric cord rewind button (depending on model)
8. Power cord storage space
9. Power cord and plug
10. Turbo button (depending on model)
11. Lock-System hoop (depending on model)
12. Removable water tank
13. Removable water tank handle
14. Steam generator boiler (in the base unit)
15. Iron-base steam cord
16. Slide storage place for the steam
cord
17. Anti-scale valve cap
18. Anti-scale valve
19. Control panel
a. “Water tank empty” light
b. “Auto off” light
c. Restart button
d. “Anti-calc” light
e. “Reset” button
f. “Steam ready” light
g. Steam output control dial
• Your steam generator is equipped with a retaining hoop which locks the iron on its base for easier transport and storage –
fig.1:
- Locking –
fig.2
- Unlocking – fig.3
• To carry your steam generator by the iron handle:
- Place the iron on the iron rest of the generator and raise the retaining hoop over the iron until it locks into place (audible
click) –
fig.2.
- Grasp the handle of the iron to carry your steam generator –
fig.1.
Preparation
What water may be used ?
• Your iron has been designed to operate using untreated tap water.
• Heat concentrates the elements contained in water during evaporation. The types of water
listed below contain organic waste or mineral elements that can cause spitting, brown
staining or premature wear of the appliance: water from clothes dryers, scented or softened
water, water from refrigerators, batteries or air conditioners, pure distilled or demineralised
water or rain water should not be used in your iron. Also do not use boiled, filtered or bottled
water.
Filling the water tank
• Place your steam generator on a stable, horizontal heat-resistant surface.
• Remove the water tank by pulling on the handle (at the front of the generator) – fig.4.
• Fill the tank with water, taking care not to exceed the maximum level – fig.6. and fig.7.
• Slide the tank back into its housing until its “clicks” into place – fig.5.
Locking system for retaining the iron on the base - Lock-system
(depending on model)
• Your iron is equipped with an extension cord system to prevent the cord from
dragging over the laundry and creasing it again when ironing. It also keeps the cord
out of the way of your hand.
Ironing with the Ultracord system:
- The Ultracord system automatically tips back.
- Each time you put the iron back on its base, the Ultracord system fits into the heel
of the iron and opens back up automatically when you use the iron.
Storing the generator:
- Fold the connector back onto the heel.
- A magnet holds the connector to the heel of the iron, making your generator easy to
store –
fig.8.
Ultracord System (according to model)
GB
Loading ...
Loading ...
Loading ...