Loading ...
Loading ...
Loading ...
7
SAFETY INFORMATION
Push and Pull - This reaction force is always opposite to the direction the chain is moving
where wood contact is made. Thus, the operator must be ready to control the PULL
when cutting on the bottom edge of the bar, and PUSH when cutting along the top edge.
(See Figure 3)
UNDERSTANDING YOUR CHAIN SAW SAFETY DEVICES (See Figure 4)
LOW KICKBACK SAW CHAIN
The rakers (depth gauges) ahead of each cutter can minimize the force of a kickback reaction
by preventing the cutters from digging in too deeply at the kickback zone. Only use replacement
B175.1. Low kickback/skip tooth saw chain is a chain that has met the kickback performance
requirements of ANSI B175.1 - 1991 (American National Standard for Power Tools - Gasoline-
Powered Chain Saws-Safety Requirements) when tested on the representative sample of chain
useful life, they lose some of the low kickback qualities and extra caution should be used.
Fig. 3
Fig. 4
PULL
PUSH
Loading ...
Loading ...
Loading ...