Loading ...
Loading ...
Loading ...
STARTING AND STOPPING THE CHAIN SAW (See Figure 8)
WARNING
Keep body to the left of the chain line. Never straddle the saw or chain, or lean over past the
chain line.
STARTING THE CHAIN SAW:
Make sure chain tension is at desired setting. Refer to Adjusting the Chain Tension in the
Maintenance of this manual.
Make sure the chain cover lock bolt is tight to the chain cover.
Make sure no objects or obstructions are in immediate vicinity which could come in contact
with the bar and chain.
Fit the battery pack into the chain saw.
Press and hold the swit
ch lock. This makes the switch trigger operational.
Press and hold the switch trigger, release the switch lock and continue to squeeze the switch
trigger for continued operation.
STOPPING THE CHAIN SAW:
NOTE: It is normal for the chain to coast to a stop once the trigger switch is released.
Release the switch trigger to stop the chain saw.
Upon release of the switch trigger, the switch lock will be automatically reset to the lock
position.
Fig. 8
16
Switch Lock
Switch Trigger
OPERATING YOUR CHAIN SAW
Lubricant
Loading ...
Loading ...
Loading ...