Loading ...
Loading ...
Loading ...
11
QUICK REFERENCE GUIDE
POWER BUTTON: Press the power button to turn the dehumidifier on and off.
SWING CONTROL BUTTON: Press once to make the louvres swing and press again
to lock at 45 degrees, press again to lock at 90 degrees. Do not operate the unit if the
self-opening louvers do not open when the unit is powered on.
TIMER BUTTON: Press the timer button before using the up and down buttons to
adjust the duration of the timer (1-24 hrs, start / stop timer).
IN POWER ON MODE: The number displayed will represent the number of hours the unit will run
for before turning off. This will remain unaffected if unit goes in to defrost mode or the tank is
emptied then reinserted.
IN STANDBY MODE: The number displayed represents the period in hours after which the unit
will start. To cancel the timer press the timer button again.
MODE BUTTON: Used to change between the 4 operating modes.
SMART MODE: In smart mode the target humidity is set to 50% and the dehumidifier will
automatically determine the best fan speed and dehumidification rate according to the humidity of
the room. The fan speed cannot be adjusted manually.
A: When the ambient humidity is >65%, the fan runs at high speed, and the dehumidifier runs at
maximum performance;
B: When the ambient humidity is between 55% and 65%, the fan runs at normal speed, and the
dehumidifier runs in eco mode.
C: When the ambient humidity is between 50% and 55%, the fan runs at low speed (Sleep), and the
dehumidifier runs in eco mode.
D: When the ambient humidity is <50%, the fan runs at a low speed with no dehumidification and
only circulates indoor air.
HEATING MODE: The unit will provide heating up to the desired room temperature, which can be
selected using the up and down buttons, this can be adjusted between 16 - 30ºC in 1ºC increments.
The control panel will display room temperature, with the front panel displaying the humidity of the
room. While adjusting the temperature, both displays will flash the desired temperature set. Use the
fan speed button to adjust the fan speed and level of heating (maximum or eco-mode).
DEHUMIDIFIER MODE: The unit will dehumidify until the required humidity level has been reached.
This can be adjusted using the up and down buttons between 35 – 80% in 5% increments. The
control panel will display current humidity of the room, and the front panel will display the room
temperature. While adjusting the desired humidity, both displays will flash the desired humidity set.
Use the fan speed button to adjust the fan speed and level of dehumidifying (maximum or eco-
mode).
AIR PURIFIER MODE: No moisture will be extracted in this mode, which, when used with filters,
will purify the air. The UV and plasma ioniser can also be used in this mode to further improve the
quality of air processed.
Smart
Heater
Air purifier
Dehumidifier
MODE
OSC
TIMER
Loading ...
Loading ...
Loading ...