Loading ...
Loading ...
Loading ...
10
HUMIDITY LEVEL & TIMER 2 DIGIT DISPLAY
The led indicator performs the following functions:
WHEN THE UNIT IS PLUGGED IN: It will indicate the humidity level of the room.
WHEN ONE OF THE HUMIDITY SETTING BUTTONS ARE PRESSED: It will
indicate the desired humidity, before reverting to showing the current humidity after
a few seconds.
WHEN THE TIMER BUTTON IS PRESSED: It will indicate how many hours the
timer function will operate, before reverting to showing the current humidity after a few seconds
Notes: If the ambient humidity is lower than 20%, the display will show “LO”. If the ambient humidity is
above 90%, the display will show “HI”. The dehumidifying function will be deactivated until the humidity
has returned to within the normal range to prevent damage to the unit.
CARBON FILTER (OPTIONAL)
Remove the carbon filter from the bag and insert it on the filter housing. It is suggested to hoover the
carbon filter every 2-3 weeks and replace it every 3-6 months to keep the room fresh and odour free.
CLEAN THE GRILLE AND CASE
Use water and a mild detergent to clean the washable mesh filters. Do
not use bleach or abrasives. Do not splash water directly onto the main
unit. Doing so may cause electric shock and can cause the insulation
to deteriorate, or the unit to rust. The air intake and outlet grilles get
soiled easily, so use a vacuum attachment or soft brush to clean. Wipe
the dehumidifier body with a soft damp cloth or kitchen towel.
HEPA FILTER (OPTIONAL):
According to the time and frequency of use, it is generally recommended to replace the HEPA filter
after about 3 months. The HEPA filter cannot be washed.
Loading ...
Loading ...
Loading ...